Search academic resources

The paper deals with the analysis and classification of the modern methods of synthesis nanostructure iron fluoride and their composites with improved performance, and also the results of testing iron fluoride in lithium...

Laser processes for cutting, annealing, structuring, and printing of battery materials have a great potential in order to minimize the fabrication costs and to increase the electrochemical performance and operational lif...

Metal-organic frameworks (MOFs) and their derivatives are found to be promising lithium-ion battery (LIB) anodes, yet their complex lithium storage mechanisms and kinetic behaviors remain insufficiently understood. In th...

The global transition to sustainable energy systems requires breakthroughs in electrochemical storage technologies that are not only safe but also resource efficient. Solid-state batteries (SSBs), which use superionic so...

A Li-ion battery consists of two active materials, namely positive and negative electrodes, and an electrolyte in contact with both. Because they use both liquid and solid electrolytes, all-solid-state Li-ion batteries, ...

Abstract Compared with ordinary graphite anode, SnO2 possesses higher theoretical specific capacity, rich raw materials and low price. While the severe volume expansion of SnO2 during lithium-ion extraction/intercalation...

A large-size battery for future industrial applications requires a higher capacity and longer cycle-life than that for the consumer applications. The Ni(OH)2 was granulated with conductive and binder materials, and the g...

The global shift towards sustainable transportation has significantly increased the adoption of electric vehicles (EVs) and their supporting charging infrastructure. While these technologies reduce greenhouse gas emissio...

The development of high-capacity anode materials remains pivotal for advancing lithium-ion battery technologies. While silicon offers a much higher theoretical capacity than graphite (3579 vs. 372 mAh g⁻¹), its severe...

The most widely used cathode materials for lithium-ion accumulators nowadays are based on LiCoO2, LiFePO4 or LiMnO4. These materials are supposed to be replaced by battery systems with new generation of cathode materi...

Antecedentes: Los pacientes fenilcetonúricos, incluso adecuadamente diagnosticados y tratados, pueden resultar con disfunción neurocognitiva. Objetivo: Evaluar la neurocognición de niños fenilcetonúricos y su relaci...

Nearly Zero Energy Buildings (NZEBs) are pivotal in addressing the escalating energy and environmental challenges of hot climates, where extreme cooling demands and reliance on fossil fuels intensify carbon footprints. T...

Background and Study Aim. Anthropometric characteristics are commonly considered important determinants of performance in basketball. Variations in body size and composition may influence the execution of fundamental tec...

En 1845-1846, ingleses y franceses trataron de forzar militarmente los pasos fluviales hacia los territorios del nordeste argentino y el Paraguay, lugares donde pretendían intercambiar mercancías por intermedio de sus ...

"In the ICELABPatagonia project, different laboratories for Karukinka National Park in Chile were designed. The main objective of these laboratories was to provide shelter against the area’s tough weather conditions, s...

Abstract We employ density functional theory (DFT) to investigate how Stone–Wales (SW) defects modulate the electronic and electrochemical properties of two-dimensional silicon carbide (SiC) monolayer for sodium (Na)-,...

Separators are considered a key component in lithium-ion batteries (LIBs); however, currently commercial polyolefin separators fall short in meeting the demands of high-performance LIBs due to their low porosity and othe...

A novel and cost-effective synthesis of silicon nanocrystallites (

Lithium-rich oxides (Li1.2Ni0.2Mn0.6O2) were obtained by two synthesis routes: co-precipitation method and solid-state reaction. Both materials showed a high degree of crystallinity, and XRD analysis revealed intense and...

The design of sulfur hosts with polar, sulfurphilic, and conductive network is critical to lithium-sulfur (Li-S) batteries whose potential applications are greatly limited by the lithium polysulfide shuttle effect. Mxene...

Lead–acid batteries are robust, low-cost, and have a large power-to-weight ratio. Recently, small amounts of carbon-based materials with a high surface area have been included in the Pb electrode as additives to improv...

Rechargeable magnesium-lithium hybrid batteries (MLHBs) are promising for energy storage applications due to their high volumetric energy density, enhanced safety, and reliable performance. However, the advancement of ML...

Alloys from the regions of existence of the solid solutions RxTb2-xNi17 and Tb2Ni17-yMy were synthesized by arc-melting with further annealing at 400 ºС. Quantitative and qualitative composition of alloys and powders ...

Tesis Energía y Ambiente (maestría) - Instituto Tecnológico de Buenos Aires, Buenos Aires - Karlsruher Institut für Technologie, Karlsruhe, 2017. For the industrial production of innovative energy storage systems suc...