Search academic resources

Subjects / keywords: OpenAIRE; Research Graph; publications; 0502 economics and business; 05 social sciences; 0202 electrical engineering, electronic engineering, information engineering; 02 engineering and technology; Crossref

Subjects / keywords: OpenAIRE; Research Graph; publications; 0202 electrical engineering, electronic engineering, information engineering; 02 engineering and technology; Crossref

Following technical innovations in the field of electrical engineering by Edison, Siemens, and many others, the technology has been introduced into Japan using foreign languages, and then a variety of the technical terms...

Virtual reality (VR) is one of the most common technologies nowadays, which make a virtual environment exactly similar to the real environment. The purpose behind this is to test several issues (designing or manufacturin...

Abstract Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms. Compared with hot-rolling technology, the electrically assisted rolling process has demonstr...

Abstract The multicomponent thermal fluid (MTF) process is a pivotal technology for enhancing heavy oil recovery. However, its injection often triggers particle migration and deposition within reservoirs, leading to perm...

Abstract This paper presents a dual-band resonant cavity in Substrate Integrated Waveguide (SIW) technology to operate in the range from 3.3 GHz to 4.2 GHz, spectrum considered for the Fifth Generation (5G) network. The ...

Abstract This paper presents a set of design equations for spiral and new scalable cross inductors in CMOS 0.35 μm technology, relating electrical parameters of the inductor's equivalent circuit as functions of its geom...

Arc fault, especially series arc fault, has been the primary cause of electrical fire, which is intermittent, hidden, random and uncertain, difficult to detect, and serious harm. The characteristics of arc fault are firs...

Abstract This paper proposes a methodology for developing antipodal Vivaldi antennas using RSIW (Ridge Substrate Integrated Waveguide) technology for a specific cut-off frequency. The technique employs metallic-vias and ...

Abstract This paper presents an effective and novel design procedure employing a novelty named as Perturbation Factor to predict the resonance frequency of resonant cavities in SIW technology perturbed by a shape perturb...

Abstract This paper describes the design of a compact microstrip microwave diplexer based on bandpass filters and a stepped impedance resonator for 4G applications. The diplexer is composed of two band-pass filters (BPF)...

Abstract This paper presents a design and simulation of a low noise amplifiers (LNA) with all passives elements embedded on low temperature co-fired ceramic (LTCC) substrate. Simulation results in ANSYS Designer and CST ...

Abstract In this paper, a new microstrip diplexer using modified H-shaped resonators with a compact size and high isolation is presented. This circuit is designed for the ISM band at 2.4 GHz and GPS at 1.575 GHz. The pro...

Abstract Normally the physical dimensions of the taper transition that realizes the impedance matching between the impedance of the feeding line built in microstrip line technology and the impedance of the component buil...

Indonesia has significant solar energy potential, ranging from 4.88-5.78 kWh/m2 /day with a production of 444 GWh by 2022, which is supported by various government initiatives and research projects focused on renewable e...

Abstract This article presents the design of K-band Substrate Integrated Waveguide (SIW) Band-pass filter with high rejection, by using the topology with iris and the SIW resonators. The simulated results of this filter ...

Abstract It is essential to establish dominant propagation mechanisms in indoor environments to model propagation loss for 5th generation networks. This work presents, discusses and analyzes the data of measurement campa...

Abstract The study proposes a multidimensional mathematical modeling of antennas using coaxial cables for 5G, with emphasis on the relationship between cable length, frequency, and VSWR. By employing a final configuratio...

This paper presents a comprehensive review of Medium Voltage (MV) Wind Energy Conversion Systems (WECS) with the integration of Wide-bandgap (WBG) semiconductor devices. With the growing demand for high-power offshore wi...

AbstractThis paper proposes a new topology of a 2-Stages Active Polyphase Filter (APPF) in MMIC GaAs technology. This new topology, named “radial”, allows a greater balancing of output signals phases and amplitudes, ...

Abstract This paper presents a study about the dielectric constant εr, dielectric loss tangent tan g(δ) and effective electrical conductivity σe of graphene, graphite and graphene-bakelite combination using the resona...

Electricity consumption measurement system with an embedded system device with Arduino-based technology combined with a current transformer sensor TA12-100 which is connected to the load of electricity consumption. Ardui...

Abstract We propose and experimentally investigate two distinct power-over-Fiber (PoF) approaches, aiming to remotely power Internet-of-Things (IoT) sensing systems for Industry 4.0 environments. The first proof-of-conce...