Cerca risorse accademiche

Three-dimensional electron diffraction (3D ED) has become increasingly popular over the last two decades, challenging the limits of established single-crystal X-ray diffraction experiments. In particular, continuous-rota...

Combined pulsed laser (CPL), introduced in 1975 for target damage, integrates different lasers to achieve high peak power and pulse energy. However, despite decades of research, CPL remains unused for long-range target d...

Polycrystalline Sr1−xTi0.9Nb0.1O3−δ (x = 0, 0.1, 0.2) ceramics have been prepared by the solid state method and their structural and thermoelectric properties have been studied by neutron powder diffraction (NPD), t...

Y-TZP (YZ) and Al2O3-doped Y-TZP (AYZ) bioceramics with addition of different contents of a refractory bioglass were fabricated. The influence of the glass addition and sintering temperature on the densification behavior...

Archaeological excavations of the Institute of Archaeology UKSW lasted from July to August 2017. Principals have reviewed the area. In the first season, four excavations were opened – three (A–C) ones in the high cas...

Glass ceramic samples with general composition: (2-х)Na2О : хМІ2О : 3CoО : 2P2O5 (х = 0 or  0.05, МІ – Li, K) were synthesized by melt method with subsequent annealing of homogeneous glass at a temperature o...

Archaeological ceramics are of heritage significance, but their biodeterioration has been poorly explored. This study examines the damage resulting from the biodeterioration of such material at an arid site in La Rioja, ...

In this work, we have performed a comprehensive investigation of the Ag+ concentration effect on the morphological, thermal, structural, and mid-infrared emission properties of novel oxyfluoride borosilicate glasses and ...

Here, (K0.44Na0.52Li0.04)(Nb0.9-xTa0.1Sbx)O3 [KNL(N0.9-xTSx)] lead-free ceramics withpotential technological applications are made through B-position substitution on the perovskitestructure by Sb ions. This strategy gene...

In the tested SnO2-Co3O4-Nb2O5-Cr2O3-CuO varistor ceramics the adding of CaO or BaO oxides leads to the decrease of the electric conductivity in the low electric field and correlated increase of the potential barrier he...

Objectives: To compare the effects of airborne-particle abrasion (APA) and tribochemical silica coating (TSC) surface treatment methods on the shear bond strength of zirconia ceramics systems, resin cements and tooth sur...

The analysis was obtained by atomic force microscopy method of topograms nanostructures on the surface of vapor-phase condensation of SnTe: Bi, thet were opened deposited by evaporation in a vacuum on substrates of ceram...

In this research, the effects of an Al2O3 nanoparticle additive on the structure and electrical properties of Pb0.88Sr0.12Zr0.54Ti0.44Sb0.02O3 (PSZST) ceramics were investi‐ gated. The PSZST ceramics with the addition ...

Based on analysis of AFM-images, presents the results of complex research the mechanisms of nucleation and growth processes, surface topology and thermoelectric properties of vapor-phase condensates PbTe-Bi2Te3, grown on...

Abstract Background This in vitro study aims to evaluate the effects of two different surface finishing procedures-glazing and polishing-on the stability of colour, the translucency, and the roughness of surface with thr...

Porous ceramics are widely used in fields such as heat insulation, filtration, sound absorption, and catalysis due to their good chemical stability, as well as the high permeability and large specific surface area of por...

Yttria- and scandia-stabilized zirconia are pivotal in solid-state oxide fuel cell research owing to their exceptional oxide ion conduction properties. In addition, the similarity between Hf and Zr, combined with their a...

Polycrystalline Sr(Bi4-xLax)(Ti3.975Zr0.025)O15 (x = 0.025, 0.05 ,0.075 and 0.1) is prepared by solid-state method. It was characterized by X-Ray Diffraction (XRD), Scanning Electron Micrograph (SEM) and Energy Dispersiv...

Ochre pigments, in all their varieties, have played a key role in Northwestern Argentinian pottery for more than 2000 years. Present in different styles, they are combined with other colours on surface paints. This artic...

The Hualfin Valley presents a long occupation period from the first agropastoralist societies (BC 200) to the Inka occupation (AD 1400). Ceramic production has played a fundamental role, being an important indicator of s...

Abstract Any product must undergo precise manufacturing before use. The damage incurred during the manufacturing process can significantly impact the residual strength of the product post-manufacturing. However, the rela...

Clay vessels are among the oldest objects created by humans. They have played a significant role in the history of humanity, both in everyday life and in culture. In the Middle Ages (approximately from the 9th to the 15t...

Nanostructure CaCu2.90Zn0.10Ti4O12 (CCZTO) electronic ceramic was synthesized by semi‐wet route. The objective of this route is to enable the calcination and sintering processes to go for completion in shorter ...