Cerca risorse accademiche

Three types of oxadiazle and traizole monomers were prepared. The monomers are polymerized with different monomers to prepare eight different polymers. The polymers are differs in the type of bonding unit. The prepared p...

The electrical properties of electrodeposited zinc‐copper‐telluride (ZnCuTe) nanowires embedded in polycarbonate track‐etch membrane (Whatman) having pore‐diameters of 200, 100 and 50nm have been studied and repo...

Calculations of the dependencies of carrier concentration and specific electrical conductivity at room temperature for the undoped and doped germanium nanofilms, grown on the Ge(x)Si(1-x) substrate with crystallographic ...

Abstract In this paper, an in-depth study of the electrical and optical characteristics of Polymer Light Emitting Diodes ITO/PEDOT: PSS/DP-PPV derivatives/Al(Ca) is presented. Three polymer materials are considered; poly...

Electrical properties (permittivity and conductivity) and speed of sound were determined in commercial vegetable oils from sunflower, corn, soybean, grape, cotton, olive, canola and chia, and in biodiesel from these oils...

Dendritic spines (DS) are tiny protrusions implicated in excitatory postsynaptic responses in the CNS. To achieve their function, DS concentrate a high density of ion channels and dynamic actin networks in a tiny special...

Anisotropic materials with chirality or birefringence can be used to manipulate the polarization states of electromagnetic waves. However, the comparatively low anisotropy of natural materials hinders the miniaturization...

Efficient electrical generation of mid-infrared light is challenging because of the dearth of materials with natural dipole-active electronic transitions in this spectral region. One approach to solve this problem is thr...

The main objective of this study is to investigate the electrical properties of Sn–3.0Ag–0.5Cu solder joint with the incorporation of carbon nanotube instead of solder bulk. Sn–3.0Ag–0.5Cu solder paste with the i...

Biological cells has natural characteristic to isolate subtances between outside and inside cell by using its membranes. By applying pulsed electric field, membrane pores can be formed that facilitates the introduction o...

Precipitation and dissolution are prime processes in carbonate rocks and being able to monitor them is of major importance for aquifer and reservoir exploitation or environmental studies. Electrical conductivity is a phy...

Abstract Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms. Compared with hot-rolling technology, the electrically assisted rolling process has demonstr...

Purpose – This study aimed to develop and evaluate CircuitPintar, a website-based learning medium designed to improve the competencies of vocational high school students in the Basic Electrical Theory element of the El...

In order to study the practicability delimitating the optimal electrical properties have been studied for soft ferrite system Mn|.xZnxFe204, which prepared by solid state method in the temperature range 300 to 550 K by s...

Problem. The reliability of detachable electrical contact connections is significantly reduced due to an increase in transition electrical resistance caused by thermomechanical deformations, oxidation of contact surfaces...

Dielectric permeability and electrical conductivity of FeGa0.8In1.2Se4 crystal at different frequencies and temperatures were studied. It was determined that the real and imaginary parts of the dielectric permittivity we...

Abstract : Electrical conductivity and seeback effect studies of soft ferrite Ni0.2Zn0.8Fe2O4 as a function of annealing temperatures range (800 – 1200)oC. The electrical conductivity and seeback effect measurements ar...

The para&mcta-poly amide were prepared by the condensation polymerization process of para- phenylenediamine and mela-phenylenediaiuine malic unhydride successively. 1 he electrical conductivity was studied for both by us...

Abstract: In this research we have to study the effect of microwave radiation on some electrical properties of the wet bone, it is included to measure the electrical current and potential in bones before and after exposu...

ObjectiveTo investigate the effects of modified Banxia Baizhu Tianma Decoction combined with low-frequency electrical stimulation on patients with ischemic stroke of wind-phlegm-blood stasis syndrome.MethodsA total of 94...

A blowout in a 14 in. diameter, 1/4 in. thick API 5L X46 oil pipeline was due to the sudden propagation of a fracture at the longitudinal Electrical Resistance Welding (ERW) weld. The cracks initiated from small hook cra...

Abstract Background Electrical stimulation of cell culture systems has shown significant potential benefits, attracting growing interest in bioelectrical research and tissue engineering. However, implementing effective s...

In order to study the electrical resistivity of oil-contaminated soils, the diesel-contaminated soils and kerosene-contaminated soils with different water contents, oil contents are mixed in the laboratory by hand. The f...

Abstract Due to the complexity of substation systems and the diversity of data sources, potential inaccuracies or inconsistencies in data may compromise the accuracy of intelligent detection. To address this issue, an in...