Buscar recursos académicos

The effects of post-deposition heat treatment on the microstructure and mechanical properties of boron nitride thin films deposited on 316L stainless steel substrates via radio frequency magnetron sputteringwere investig...

This Effect of Nano-carbon additives on mechanical performance and durability of cementitious composites in oi terms of static and dynamic modulus is studied. A Nano carbon powder was admixed in 5%, 10% and 15 % levels a...

The lightweight technique for automobile is urgently needed to achieve the aim of CO2 emission control. In this paper, the mechanical properties and the interfacial shear strength (IFSS) of carbon fiber reinforced polypr...

Rational protein design has successfully enhanced the mechanical stability of biomaterials by optimizing the internal topology of force-bearing domains. However, current design strategies predominantly focus on isolated ...

"In measurements with cryogenic current comparators (CCCs), robustness against mechanical distortions is an issue. Sources of distortions are part of the experimental environment, efficient suppression is difficult. In a...

Abstract Background Parasympathetic tone activity (PTA) in response to nociceptive stimulus in conscious non‐sedated horses is unknown. Objectives Study PTA, heart rate (HR), and horse grimace scale (HGS) at rest and d...

Objective: To investigated how post-curing times of 10 minutes and 20 minutes affect the mechanical properties and surface characteristics of LCD-printed denture base resin. Materials and Methods: Ninety standardized spe...

Abstract The remaining useful life (RUL) prediction of mechanical products has been widely studied for online system performance reliability, device remanufacturing, and product safety (safety awareness and safety improv...

The comparative investigation of two chemical polishing methods as applied to GaAs substrates is carried out. In both cases the equal etchant Br2+HBr was used. The comparison of etching rates and of surface morphology is...

Hydrogel of single-walled carbon nanotubes and polyaniline has been used for thermopower engineering applications due to desirable thermal, electrical, and mechanical properties as well as tunable degradability. In this ...

Abstract In previous studies about the synchronization of vibrators, the restoring forces of springs are mainly treated as linear directly, whereas the nonlinear features are rarely considered in vibrating systems. To ma...

Abstract In this research, we prepared a eutectic ternary alloy from (Pb-Sn-Zn) metals under normal pressure. We investigated some of the physical properties of the alloy and their elements, which are thermal properties ...

"Integrating field and laboratory data is possible if there are strong geologic criteria to relate them. This challenge demands understanding rocks from the fabric and mineralogy up to the architectural elements of rock ...

Tesis Energía y Ambiente (maestría) - Instituto Tecnológico de Buenos Aires, Buenos Aires - Karlsruher Institut für Technologie, Karlsruhe, 2024 "Fibre reinforced polymers (FRP) used in outdoor applications are expos...

Abstract Friction Stir Welding (FSW) is the most promising solid-state metals joining method introduced in this era. Compared to the conventional fusion welding methods, this FSW can produce joints with higher mechanical...

Abstract Lower limb rehabilitation exoskeleton robots integrate sensing, control, and other technologies and exhibit the characteristics of bionics, robotics, information and control science, medicine, and other interdis...

Abstract This research employs hybrid machine learning techniques to optimize the mechanical properties of 3D-printed polylactic acid (PLA) lattice structures. By integrating random forest (RF) and XGBoost (XGB) algorith...

Additive manufacturing (AM), or 3D printing, is an emerging technology that “adds” materials up and constructs products through a layer-by-layer procedure. Laser powder bed fusion (LPBF) is a powder-bed-based AM tech...

This paper examines the influence of controlled heat treatments on the mechanical behaviour of Ti-6Al-4V (Grade 5 Titanium alloy) to improve its performance in structural and high performance applications. Ti-6Al-4V is w...

Abstract The paper proposes a novel multi-legged robot with pitch adjustive units aiming at obstacle surmounting. With only 6 degrees of freedom, the robot with 16 mechanical legs walks steadily and surmounts the obstacl...

Abstract Epistyliasis has been characterized as an emergent disease which has a great impact on fish farms, especially on Oreochromis niloticus production systems. Although epidemiological important, information about th...

Abstract Rare earth (RE) elements have positive effects on Al alloy, while most research is focused on microstructure and mechanical properties. As important application indices, toughness and plasticity are properties t...

Abstract An external electric or magnetic field can transfer high-intensity energy directly to the electronic scale of materials, and change the spin, energy level arrangement and trajectory of electrons. These changes p...

The present work investigates the compressive mechanical response of three lattice structures manufactured via VAT photopolymerization. A bio-inspired architecture, derived from the observation of Euplectella aspergillum...