Buscar recursos académicos

The effects of induced magnetic field, thermal and concentration convection on the peristaltic flow of Prandtl nanofluids are explored in this study in an inclined asymmetric channel. A detailed mathematical explanation ...

In this study, an all-optical multiplexer (Mux) based on elliptical insulator-metal-insulator (IMI) plasmonic waveguides is designed. The area of the proposed structure is very small (400 nm × 400 nm) which oper...

Carbon nanomaterials are effective adsorbents for water treatment. This study examines natural organic matter (NOM) removal from drinking water with combined coagulation processes using single-walled carbon nanotubes (SW...

In this chapter, we will focus on a specific X‐raybased technique among those employed in surface science and which is especially suitable for the study of self‐assembled nanocrystals: Grazing Incidence Small Angle X...

Ultrafine pure and Mn-doped SnO2 nanoparticles (NPs) were synthesized via the microwave technique. They were produced using tin chloride and hexamethylenetetramine at the molar ratio of 1:20. The concentrations of Mn in ...

In this paper we present a rapid and simple onepot method to obtain gold nanoparticles functionalized with folic acid using a photochemistry method. The bioconjugate folic acid-gold nanoparticle was generated in one step...

Platinum nanoflowers (Pt NFs) composed of an ordered assembly of nanoparticles were synthesized by an ethanol reduction of [PtCl6]2– under a reflux condition (85 °C) at pH 2.5 in the presence of PVP (molecular weight ...

Microring resonators (MRRs) are the important devices for the development of silicon-based optoelectronic integrated chips. Their composition of optical modules, such as optical modulators, switches, and optical logic ga...

This paper presents a study of adsorption and vibrational features of folic acid, using surface-enhanced Raman scattering (SERS). A gold-capped silicon nanopillar (Au NP) with a height of 600 nm and a width of 120 nm was...

Murraya paniculata (MP) can be used as a reducing agent to produce silver nanoparticles (AgNPs) using a simple procedure. AgNPs are characterized in morphological and chemical properties, antioxidant activity, and cytoto...

In the present work, the synergistic effect of multiwalled carbon nanotubes and glycidyl polyhedral oligomeric silsesquioxanes on the compression after impact behaviour of multifunctional carbon fibre–reinforced epoxy ...

Silver colloid based nanostructures are a very common means of achieving strong SERS signals. This is due to the hot spots that are formed in between the nanoparti‐ cles, as well as their ease of synthesis. They are fr...

In this article, we report the measurement of underwater aerophobicity, through the captive-bubble method, for different polymeric coatings employed to protect microscale and nanoscale flexible electronic devices for sea...

Raw TiO2 nanoparticles were prepared using the hydroly‐ sis of TiCl4. The nanoparticles were subjected to a surface treatment in diluted sulphuric acid and, subsequently, calcined at different temperatures. Then, a typ...

Along with the increasing requirement for efficient organic conversions using green chemistry, there is a need to develop highly efficient and eco-friendly catalytic reaction systems. Gold nanoparticles (AuNPs)-based nan...

What makes three dimensional semiconductor quantum nanostructures so attractive is the possibility to tune their electronic properties by careful design of their size and composition. These parameters set the confinement...

The catalytic conversion of palm oil was carried out over four zeolite catalysts—Y, ZSM-5, Y-ZSM-5 hybrid, and Y/ZSM-5 composite—to produce jet biofuel with high amount of alkanes and low amount of aromatic hydrocarb...

In this article, we report modeling, simulation, and analysis of shifting 2D photonic crystal cavity side holes in GaN-AlN-sapphire layered structure. The design was simulated with Lumerical finite-difference time-domain...

We investigated the effects of dopants on epitaxial growth of Si NWs, with an emphasis on synthesizing vertical epitaxial Si NW arrays on Si (111) substrates. We found that addition of boron with a B:Si feed-in atomic ra...

Graphite was exfoliated to graphene by tip sonic using sodium cholate as a surfactant in the presence of Millipore water as a medium. The use of water as a solvent for exfoliation purposes is very important due to its en...

In this study, we evaluated a nanoscale random rubbed structure (nRRS) used as a scattering layer in organic light-emitting diodes (OLEDs) through an innovative manufacturing method. The rubbing technique, which is conve...

To improve the photocatalytic property of titanium dioxide, titanous sulfate as the titanium source, cobalt nitrate hexahydrate as the cobalt source, undoped and Co 2+ -doped titania nanotubes were prepared via coprecipi...

This paper describes an easy and time-saving strategy for the fabrication of heterogeneous nanotubular arrays of TiO2-CdS (TCHNTAs) on transparent conductive glass (FTO) and their photoelectrochemical properties. The use...