Buscar recursos académicos

To overcome the oxidation limitation and incomplete combustion of micron-sized aluminum caused by its native oxide shell, an F2314 nanocoating was constructed on 1 μm spherical Al particles by electrostatic spray granu...

This research introduces a hybrid modeling framework that combines intricate combustion dynamics with machine learning (ML) to facilitate the decarbonization and retrofitting of traditional diesel engines utilizing Hydro...

The increasing discharge of high-salinity industrial wastewater poses serious environmental and resource challenges, necessitating innovative utilization approaches. In this study, high-salt wastewater containing Na+ and...

The combustion dynamics and characteristics of dense iron–ethanol slurry droplets containing 30 wt% Fe (in both micron- and nano-sized forms) and Fe-doped Al/Fe2O3 thermites containing 5 wt% Fe (in both micron- and nan...

Ammonia/diesel blended fuel significantly reduces carbon emissions, but it has issues such as high unburned ammonia emissions and low combustion efficiency. To achieve the goals of carbon peak and carbon neutrality, this...

Abstract This study was conducted to elucidate the combined effects of intake-air temperature (IAT), excess air ratio (λ), and fuel blend composition on the combustion behavior of an HCCI engine. Three butanol/diethyl e...

Combustion of Al in F-containing oxidants possesses some attractive advantages on improving combustion efficiency; however, the mechanism therein has not been fully clarified yet. This study employs reactive molecular dy...

3,4-Dinitrofurazanfuroxan (DNTF) is a highly energetic material with high sensitivity. For its handling safety, preparation of polymer-bonded composites is an effective approach. In this study, thermoplastic polyurethane...

Microwave ignition (MWI) technology enables synchronized large-area multi-point ignition, multi-pulse operation, higher combustion temperature and efficiency, and dynamic thrust modulation through microwave field adjustm...

The palm oil industry plays a key socio-economic role in tropical countries but generates waste with untapped economic potential. This work aims to advance sustainable solutions through valorization of plantation waste, ...

Ammonium dinitramide (ADN), as a novel oxidizer characterized by high energy density, low signature, and environmental friendliness, exhibits significant application potential in composite solid propellants. However, its...

To address key challenges of conventional spherical gun propellants, including inconsistent energy release, harmful gas emissions, and long-term storage instability, this study utilizes fluidized bed technology combined ...

Mn-Cu mixed oxides were deposited by ultrasonic impregnation on ceramic honeycomb monoliths. Its catalytic performance was evaluated in the combustion of ethanol and n-hexane, VOC molecules of different chemical nature. ...

Abstract Increasing concerns about greenhouse gas emissions and local air pollution have motivated the search for sustainable transportation alternatives. Electric vehicles (EVs) offer a promising solution, yet their pot...

This study aims to evaluate the effect of the commercial treatment material (PentoMag) on combustion completeness in fossil-fueled steam power plants, using the unburned carbon fraction in the ash as a key indicator. Ash...

En el presente trabajo se desarrolló una termocupla de respuesta rápida para medición de flujo de calor en motores de combustión interna. El objetivo principal fue diseñar y fabricar una solución interna, de bajo c...

With the increasing relevance of energy transition, synthetic fuels have arisen as an alternative to storage green energy. In the processing of this fuels, carbon monoxide is widely used. Understanding the behaviour of t...

"This thesis evaluates the technical, economic and environmental performance of a hydrogen fueled hybrid bus, which uses an internal combustion engine as a power unit. Results are compared to those of a conventional dies...

La finalidad de este trabajo es la modelización y simulación de un sistema de control para ensayos de motores de combustión interna. Este modelo computarizado de tiempo real estará destinado a predecir el desempeño ...

"The global energy crisis necessitates the development of sustainable energy sources, with nuclear fusion representing a significant long-term opportunity for the future. However, the licensing process for facilities lik...

"To further optimize the combustion process, a precise knowledge of multiple in-cylinder parameters is necessary. This thesis investigates the calibration and setup of a temperature measurement system by means of two-dim...

El cambio climático y la crisis ambiental que protagonizamos se debe, en gran parte, a las consecuencias de una matriz energética global que aún sigue dominada por combustibles fósiles que emiten gases de efecto inve...

Sumario: Introducción - Sensor Hall - Método de medida - Estrategia de medición - Simulación de la señal de salida del sensor Hall - Simulación final - Estudio de la señal de salida del sensor Hall - Simulación a...

Ingeniero Químico Universidad Nacional de La Plata Facultad de Ingeniería