Buscar recursos académicos

Laminate composites offer an effective strategy to overcome strength-ductility trade-off by harnessing the synergistic properties of constituent metals. In the TA1/304 steel composite, a unique nano-scale heterostructure...

In this work, we show that the interfacial adhesion between carbon fibers (CFs) and epoxy matrix in laminated composites can be significantly enhanced by the chemical vapor deposition (CVD) growth of multiwalled carbon n...

Abstract This study presents the synthesis, characterization, and application of silanized nano-biochar (SNB) derived from palm kernel shell for the development of high-performance low-density polyethylene (LDPE) composi...

A method is proposed for determining the components of complex permeabilities of composites within a specified frequency range. The parameters are calculated from measured data on the traveling-wave coefficient and wavel...

This work introduces a novel geometrical and analytical modeling framework for predicting the stiffness properties of knitted composites, a class of materials known for their complex architectures and versatile mechanica...

Latar belakang. Pada kasus kehilangan gigi-gigianterior tanpa penggantian secepatnya akan menyebabkan rasa malu, tidak percaya diri,gangguan berbicara dan bersuara, pergeseran gigi-gigitetangganya, tilting,hilangnyakonta...

The conditions of formation and properties of hybrid organic-inorganic composites based on epoxy polymer matrix and a mixture of magnetic and polymeric fillers are studied. Based on the study of physicochemical properti...

Abstract Over the last two decades, researchers have focused on natural reinforcement composites as choice to conventional and man-made fiber composites due to their enhanced properties. While many research has studied t...

The mechanical performance of different wood flour/polypropylene (PP) composites with interface modifications was compared. Wood flour was incorporated into the matrix after esterification with maleic anhydride (MAN) or ...

Abstract Composites are increasingly employed in aerospace, automotive, construction, sports, and defense industries owing to their high strength-to-weight ratio, corrosion resistance, and customizable properties. This s...

Blends and composites were obtained by mixing commercial metallocenic linear low density polyethylene (LLDPE) and isotactic polypropylene, with different molecular weight polydimethylsiloxanes (PDMS), including a vinyl e...

This review aims to critically investigate the swelling behavior of natural fiber-reinforced composites (NFRCs), with a focus on identifying key mechanisms of moisture absorption, the influence of fiber–matrix interact...

Abstract In this study, aluminium (Al) matrix composites reinforced with 0, 5, and 10 vol% silicon carbide (SiC) particles were fabricated by direct hot-pressing under 35 MPa pressure at 600 °C for a holding time of 5...

The final properties of composite materials are highly dependent on the residual geometrical parameters (length, diameter, aspect ratio), orientation and distribution of the fibres in the matrix, which in turn are relate...

A novel fibre treatment recently proposed in the literature was optimised in the case of woven jute fabric/vinylester laminates to obtain the best tensile properties. It consists on an alkali treatment superimposed to bi...

Copper matrix composites face the inherent strength-conductivity trade-off, limiting their high-end applications. Inspired by bone and bamboo, a bioinspired oriented multicore composite (BOMC) was fabricated. Its dual-ne...

Thermoset and fiber-reinforced composites (FRCs) are widely adopted for their exceptional mechanical strength, thermal resistance, and chemical stability that have demonstrated versatile applications across aerospace, au...

Abstract This study presents the development and characterization of epoxy-based composites reinforced with Aloe Vera powder and Flyash, advancing circular economy objectives through the valorization of bio-derived and i...

Abstract This study investigates the influence of graphene nanoparticle (GNP) reinforcement on the fatigue behavior of textile structural composites with unidirectional (UD), two-dimensional (2D) satin, and three-dimensi...

This paper reports the results of an experimental program on sustainable cementitious composites made with Recycled Brick Aggregates (RBAs) employed as carriers for Phase-Change Materials (PCMs). The PCM-RBAs were produc...

High-density polyethylene sheets (HDPE), HDPE/GaAs and HDPE/ GaAs  composites with GaAs and GaAs semiconductor fillers were studied by X-ray diffractometry at room temperature. The degree of crystallization of these sam...

This study investigates how four nano-additives, namely graphene, amine-functionalized graphene, hexagonal boron nitride (hBN), and multi-walled carbon nanotubes, affect the properties of polylactic acid (PLA) used in ma...

In this work, a review and mathematical analysis of phenomenological models of residual strength and residual stiffness of polymer composite materials under fatigue loading have been carried out. The methodology of the a...