Search academic resources

Frame denture generally uses Co-Cr alloy. However, alloy is expensive, so dental laboratories use residual sprue casting for recasting. The purpose of this study was to determine the effect of Co-Cr alloy recasting on fr...

Abstract In this research, we prepared a eutectic ternary alloy from (Pb-Sn-Zn) metals under normal pressure. We investigated some of the physical properties of the alloy and their elements, which are thermal properties ...

Cobalt chromium (CoCr) alloys are utilized to make dental prosthesis. Casting CoCr alloys is a common operation in dentistry laboratories due to its low cost. Casting surplus (metal remaining in the sprue and crucible fo...

ABSTRACT High alloy content and multiphase synergistic strengthening have become crucial strategies in contemporary metallic materials design for performance enhancement. A major challenge in this field lies in addressin...

The purpose of this research is to investigate the casting process of producing Al-brass alloy (76% Cu, 22% Zn, 2% Al) and destroying it chemically in accordance with the methods used in simulating damaged archaeological...

Abstract During the oscillating twin-roll strip casting process, the quality of final products is directly influenced by the flow field distribution of molten metal in the pool. The variation in the flow field is caused ...

Understanding the interaction between the parameters involved in the columnar-to-equiaxed transition (CET) has gained considerable attention over the last two decades in the study of the structure of ingot castings. The ...

Abstract Squeeze casting (SC) is an advanced net manufacturing process with many advantages for which the quality and properties of the manufactured parts depend strongly on the process parameters. Unfortunately, a unive...

Samples of the multicomponent high-entropy alloy CoCrFeMnNiBe were obtained by the methods of casting and melt-quenching, and their phase composition and electrochemical behavior were investigated. With the help of X-ray...

The duel sized silicon carbide (SiC) particles are reinforced A356 metal matrix composite is casted through modified squeeze casting technique by varying SiC percentage viz 1 %–5 % by weight. The tensile strength a...

This research deals with the preparation number of composite materials by casting the base alloy (Al-Co-Ni) by adding chromium oxide (Cr2O3) as reinforcement material, by weight ratios of (5, 10, 15 wt%) for the base all...

Abstract According to relevant airworthiness standards, the aircraft fuel tank access cover must withstand the impact by tire fragments, and minimize the penetration and deformation, which is critical for flight safety. ...

Subjects / keywords: manufacturing, including raw materials, alloy casting, extrusion and deformation, corrosion and surface treatment, joining and machining; Technology: Mining engineering. Metallurgy

The martensitic transformation properties (maximum strain, residual strain and transformation stability) of Ni50-x-Ti50-Cox strips produced by twin-roll casting (TRC) and standard casting (SC) were compared. A complete m...

Hybrid aluminum 6061 composites reinforced with various forms of magnesite-white (WM), dead-burnt magnesite (DBM), and lightly calcined magnesite (LCM)-in combination with carbon fiber (CF) were developed through the sti...

Subjects / keywords: Materials science; Melt spinning; Alloy; Casting; Microstructure; Phase (matter); Metallurgy; Scanning electron microscope; Brittleness; Optical microscope; Microanalysis; Phase diagram

Subjects / keywords: Materials science; Supercooling; Amorphous metal; Superplasticity; Amorphous solid; Ductility (Earth science); Casting; Metallurgy; Alloy; Composite material; Thermodynamics; Crystallography

Subjects / keywords: foundry, casting, metal, materials, alloys, moulding; Technology: Manufactures