Search academic resources

This study aimed to synthesize fillers in the form of alumina-zirconia-carbonate apatite and pineapple leaf fiber (Ananas comosus (L.) Merr) as matrix reinforcement consisting of UDMA, TEGDMA, and DMAEMA for direct denta...

Abstract Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms. Compared with hot-rolling technology, the electrically assisted rolling process has demonstr...

In this work were investigated the structure, phase composition, mechanical and tribotechnical properties of aluminium matrix composites obtained by hot forging. The results of local phase analysis showed that the hot fo...

Abstract: Mechanical properties of (LDPE-463)/Citrus Aurantium shell composite are assessed with respect to the effect of Citrus aurantium shell content varying from 2.5% to 50%. An obvious decrease in the mechanical par...

Mg-Co-Zn Soft ferrite and Ba-Sr hard ferrite composites were prepared by employing the green synthesis technique, in which lemon extract was used as a chelating agent in the reaction. Structural, morphological, and magne...

The study of composite materials based on mechanical mixtures of microdispersed PbTe and nanodispersed additional component ZnO, TiO2, SiO2 (50-70 nm) or microdispersed CdTe (32-50 μm) was performed. The purpose of this...

This study addresses the issue of nanoparticle agglomeration and the resulting inhomogeneous structure and performance degradation in Cu–Al₂O₃ composite coatings prepared by jet electrodeposition. To improve partic...

Abstract The aluminum (Al)/steel transition joints used in ships are processed from composite plates, and their mechanical properties have a significant impact on the safety of ships. In this paper, the Al/steel composit...

Abstract A novel biphasic Dy2Hf2O7-HfO2 composite was synthesized via a solid-state reaction route for potential thermal barrier coating (TBC) applications. X-ray diffraction confirmed that the reaction between Dy2O3 and...

Nanocomposites, especially natural rubber (NR), have been extensively studied for their unique features and superior performance in tire applications. The present research investigated the impact of zinc oxide nanopartic...

In this work, a review and mathematical analysis of phenomenological models of residual strength and residual stiffness of polymer composite materials under fatigue loading have been carried out. The methodology of the a...

Introduction. The extension of the range of binders, aggregates, and fillers as well as functional additives and structural modifiers for concrete and composite materials currently allows for the production of innovati...

This study investigates the properties of a composite material obtained by mixing Fe78Si9B13 metallic powders (at %) with graphene nanoplates (GNP) in an epoxy matrix. Four composite types were created with GNP weight pr...

Experimental research has determined the optimal composition of components for a composite material used in electrical contacts with unique properties designed for high-current electrical apparatus that perform switching...

The duel sized silicon carbide (SiC) particles are reinforced A356 metal matrix composite is casted through modified squeeze casting technique by varying SiC percentage viz 1 %–5 % by weight. The tensile strength a...

The aim of this paper is to establish the optimal content of carbon material in composites with nanocrystal hydrate nickel molybdate. To achieve this, NiMoO4 / C composites with a carbon material content of 1, 5 and 10% ...

Electrochemical behavior after laser irradiation of TіS2 and its TіS2/С composite with 50% and 80% of NCM (nanoporous carbon material) content in aqueous electrolyte was investigated. It was shown that for TіS2 and i...

This study investigated the mechanical and thermal properties of polylactic acid (PLA) composites produced using a hand layup 3D printing process, highlighting advancements in the manufacturing of hybrid hemp fibre PLA c...

The paper presents the results of studies of electrochemical properties of composite MoS<sub>2</sub>/C. It is shown that the contribution to the conductivity of composites makes a charge accumulation capaciti...

Incorporation of filler materials in polymer composites have gained due to their superior qualities such as improved properties. The objective of the work is to study the effect of plant-based fillers, such as Rice Husk ...

Carbon nanotubes are considered to be ideal candidates for improving the mechanical properties of polymer nanocomposite scaffolds due to their higher surface area, mechanical properties of three-dimensional isotropic str...

This Effect of Nano-carbon additives on mechanical performance and durability of cementitious composites in oi terms of static and dynamic modulus is studied. A Nano carbon powder was admixed in 5%, 10% and 15 % levels a...

Ecofriendly chitosan/Al-MCM-48 (CH/Al-MCM) was synthesized from natural microcline and assessed as a potential adsorbent of As (V) ions with enhanced capacity. The As (V) adsorption properties of CH/Al-MCM were assessed ...

Hydrogel of single-walled carbon nanotubes and polyaniline has been used for thermopower engineering applications due to desirable thermal, electrical, and mechanical properties as well as tunable degradability. In this ...