Search academic resources

Nanofluids based on transformer oil have emerged as promising candidates for improving insulation performance in high-voltage equipment. This study investigates the influence of TiO2 nanoparticles on the dielectric stren...

CO₂ emissions are a critical environmental concern driving global climate change, particularly the rise in Earth's average temperatures. Therefore, reducing CO₂ release into the atmosphere is essential. One promising...

In this study, the cooling performance of nanofluids in car radiators was investigated. A car radiator, temperature measuring instrument, and other components were used to set up the experimental device, and the temperat...

Abstract Nanofluids have emerged as promising heat transfer media due to their superior thermal performance associated to conventional fluids, yet their behavior under mutual impacts of radiation, heat source/sink, and m...

A covalent functionalization approach was utilized for the preparation of highly dispersed pentaethylene glycol-thermally treated graphene-water as the absorbing material inside a flat-plate solar collector. Four mass fr...

Heat transfer characteristics of graphene oxide (GO)/turbine oil as a non-Newtonian nanofluid are assessed both experimentally and numerically in this paper. To do so, 0.2, 0.3, 0.5, and 1 mass percent (wt%) of GO is hom...

The effects of induced magnetic field, thermal and concentration convection on the peristaltic flow of Prandtl nanofluids are explored in this study in an inclined asymmetric channel. A detailed mathematical explanation ...

Abstract Nanofluid minimum quantity lubrication (NMQL) is a green processing technology. Cottonseed oil is suitable as base oil because of excellent lubrication performance, low freezing temperature, and high yield. Al2O...

Nanofluids are engineered colloids made of a base fluid and nanoparticles (1-100nm). Nanofluids have higher thermal conductivity and single-phase heat transfer coefficients than their base fluids. In particular, the heat...

A cuprous oxide nanofluid stabilized by sodium lauryl sulfate, synthesized by using the one step method, has been reported. Nanofluids were synthesized by using a well‐ controlled surfactant‐assisted solution phase s...

The global water emergency requires innovative and sustainable solutions to afford clean water especially after a rapid growing populations and industrial practices besides environmental changes. Solar desalination, part...

Abstract Multi-component nanofluids have attracted increasing attention for advanced heat transfer and energy systems; however, experimental data on oxide-based quadri-hybrid nanofluids, particularly regarding their coup...

Abstract Minimum quantity Lubrication (MQL) is a sustainable lubrication system that is famous in many machining systems. It involve the spray of an infinitesimal amount of mist-like lubricants during machining processes...

Significant research interest in hybrid nanofluids stems from their extensive applications in areas like industrial cooling and biomedical engineering. The present investigation focuses on a hybrid Casson nanofluid, a no...

Abstract This model is highly helpful in thermal management and complex energy systems, particularly where precise control over heat and mass transfer is required. Solarized nanofluids can be used to improve heat absorpt...

Abstract The conversion of solar radiation into thermal energy has gained increasing attention due to the growing demand for renewable sources of heat and electricity. Nanofluids, owing to their enhanced heat transfer ca...

Abstract This study examines the flow and heat transfer behavior of a tri-hybrid nanofluid over an exponentially stretching/shrinking surface, incorporating the influences of thermal radiation, viscous dissipation, inter...

Abstract Graphene has superhigh thermal conductivity up to 5000 W/(m·K), extremely thin thickness, superhigh mechanical strength and nano-lamellar structure with low interlayer shear strength, making it possess great po...

"Thickened CO2 nanofluids are a mean to improve volumetric sweep efficiency and gas production in CO2 EOR projects in contrast CO2 flooding. Alternating injection of plain CO2 with thickened CO2 nanofluid is proposed as ...