Cerca risorse accademiche

The study aims to prepare thin CdO films with a thickness of 232 nm using the spin coating method. This involved depositing the cadmium acetate in 2-methoxyethanol on glass substrates. This thin layer was prepared at a r...

Tin doped SrCo2O4 thin films at 0%, 3% and 5% on "pyrex" glass substrates have been prepared by Sol-gel Dip-coating method. In both cases cobalt nitrate, strontium nitrate and tin chloride were used as cobalt and stronti...

Several metal-organic framework (MOF) materials have been recently employed in optoelectronic devices due to the unique properties of the MOF materials that result in enhanced performance and stability. In this work, the...

We describe a rapid and simple method to create Ag nanostructures by using direct mechanical patterning of ionic Ag ink coating under gentle pressure, then thermal annealing to reduce the ionic Ag ink to a metallic Ag la...

The present work is carried out within the framework of a research project launched within the physical engineering laboratory at the University of Tiaret in Algeria. The objective is to optimize the conditions for produ...

With performance improvements, organic photovoltaics (OPVs) are an increasingly competitive technology for renewable energy. However, most high-performance OPVs are small-area devices processed from toxic halogenated sol...

NiTi alloy has important properties such as shape-memory, super-plasticity, resistance, and biocompatibility, therefore is frequently used in biomedical devices. We studied the oxidized form of this alloy and possible Ni...

Molecular design and preparation of redox active films displaying mesoscopic levels of organization represents one of the most actively pursued research areas in nanochemistry. These mesostructured materials are not only...

Abstract This work conducts a comprehensive numerical study of a concentrated photovoltaic–thermal (CPVT) system equipped with a V-trough reflector, with the objective of enhancing output power under realistic operatin...

By the method of microarc oxidation for different types of electrolytes (which include KOH, Na2SiO3, Н2О2, NaOH, NaAlO2, Na5P3O10, NaF) and electrolysis conditions, multifunctional ceramic coatings on a magnesium alloy...

Germanium selenide (GeSe) nanosheets are stable and inexpensive and considered to have a great potential for photovoltaic applications, however we have demonstrated that GeSe nanosheets are also promising for sensing tec...

The results presented here show for the first time the experimental demonstration of the fabrication of lossy mode resonance (LMR) devices based on perovskite coatings deposited on planar waveguides. Perovskite thin film...

Leptospirosis disease was caused by rat urine which contains the genus Leptospira bacteria. In this study, the fabrication of Pd-Fe-doped polyaniline nanocomposite thin films for the determination of the genus Leptospira...

In this paper, we demonstrate simultaneous AFM/NSOM using a dual-tip normal tuning-fork based scanning probe microscope. By scanning two SPM probes simultaneously, one dedicated for AFM with a standard tip diameter of 20...

Solution processible photovoltaics (PV) are poised to play an important role in scalable manufacturing of low-cost solar cells. Electrospray is uniquely suited for fabricating PVs due to its several desirable characteris...

Sulfide superionic conductors (e.g., argyrodite Li6PS5Cl, LPSCl) are extremely promising for all solid‐state batteries, but poor atmospheric stability and high interfacial reactivity limit widespread adoption. Coating ...

Abstract Photonic crystals are periodic structural materials that have an impact on the propagation properties of photons. Due to their excellent optical, electrical and magnetic properties, their advantages and potentia...

ABSTRACT In this work, the effect of iodine (I) impurities on the optical properties of (PS) thin films studied, which prepared by spin coating method on glass Substrates with thickness (40,50,60)µm at room temperature....