Cerca risorse accademiche

Abstract The equipment used in various fields contains an increasing number of parts with curved surfaces of increasing size. Five-axis computer numerical control (CNC) milling is the main parts machining method, while d...

Electric Discharge Machining (EDM) is a non-traditional machining process that utilizes electric sparks between an electrode and a workpiece submerged in a dielectric fluid to ablate a material. It is commonly used in di...

Abstract A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities of...

Abstract Lower surface roughness and sharper cutting edge are beneficial for improving the machining quality of the cutting tool, while coatings often deteriorate them. Focusing on the diamond coated WC-Co milling cutter...

Abstract The current study of minimum quantity lubrication (MQL) concentrates on its performance improvement. By contrast with nanofluid MQL and electrostatic atomization (EA), the proposed nanofluid composite electrosta...

Abstract In electrochemical machining (ECM), the electrolyte flow field has a significant effect on machining stability, efficiency, and surface quality. In multitool ECM of blisk channels, the traditional open outflow m...

Abstract Accurate kinematic calibration is the very foundation for robots’ application in industry demanding high precision such as machining. Considering the complex error characteristic and severe ill-posed identific...

Transparent brittle materials such as glass and sapphire are widely concerned and applied in consumer electronics, optoelectronic devices, etc. due to their excellent physical and chemical stability and good transparency...

Abstract Machining damage occurs on the surface of carbon fiber reinforced polymer (CFRP) composites during processing. In the current simulation model of CFRP, the initial defects on the carbon fiber and the periodic ra...

Abstract Casing parts are regarded as key components of aero-engines. Most casing parts are attached to convex structures of different shapes, whose heights range from hundreds of microns to tens of millimeters. Using pr...

Abstract The coating material of a tool directly affects the efficiency and cost of machining malleable cast iron. However, the machining adaptability of various coating materials to malleable cast iron has been insuffic...

Abstract Increasing demands for sustainable manufacturing are accelerating the need for efficient scrap reutilization routes that extend beyond conventional remelting practices. In this context, solid-state reuse of mach...

ObjectiveThe cycloid gear is a core component of the RV reducer, and its high-efficiency and precision machining methods are crucial for ensuring the performance of the reducer. In view of this, the basic principle metho...

Abstract Pure iron is one of the difficult-to-machine materials due to its large chip deformation, adhesion, work-hardening, and built-up edges formation during machining. This leads to a large workpiece deformation and ...

Abstract A honeycomb structure is widely used in sandwich structure components in aeronautics and astronautics; however, machining is required to reveal some of its features. In honeycomb structures, deficiencies, such a...

Abstract Hierarchical micro/nanograting structures have attracted increasing attention owing to their significant applications in the fields of structural coloring, anti-counterfeiting, and decoration. Thus, the fabricat...

Abstract Industrial robots are increasingly being used in machining tasks because of their high flexibility and intelligence. However, the low structural stiffness of a robot significantly affects its positional accuracy...

Abstract Cutting fluid is crucial in ensuring surface quality and machining accuracy during machining. However, traditional mineral oil-based cutting fluids no longer meet modern machining’s health and environmental pr...