Cerca risorse accademiche

Introduction. Recently, multilevel inverters (MLIs) have been widely investigated for industrial and renewable energy systems as they are valuable in applications where they can produce clean, high-fidelity electrical si...

Nowadays, the use of renewable energy is increasing, especially distributed power generation (DG) connected to the power grid. There are several problems when DG is connected to the grid. The principal obstacle pertains ...

The output voltage of PWM power inverters shows harmonic distortion due to several causes; the main ones are the modulation algorithm, nonlinearities in the output filter, dead times, voltage drops across the switches an...

Abstract The growing deployment of grid-connected voltage source inverters (GC-VSIs) in the smart grids poses some significant issues that include harmonic distortion, grid impedance fluctuations, nonlinear loading, and ...

Abstract Multi-level inverters (MLIs) are also used in relatively high-power systems; but the goals of low overall harmonic distortion (THD) and fewer power semiconductor devices remain a design issue of serious difficul...

The use of neutral point clamped (NPC) multilevel inverters has significantly increased in recent decades, due to their appealing features compared to two-level voltage source inverters. In many industry-level applicatio...

Introduction. Nowadays, the most widely used wind energy conversion system in wind farms is based on a doubly fed induction generator (DFIG); it has a large speed range and can function in multiple modes. Problem. Harmon...

Three-phase pulse width modulation (PWM) rectifiers are crucial in industrial, civil, and transportation applications. Due to the diversity of grid loads, the three-phase input voltage may be unbalanced, which consequent...

A new methodology to design discrete-time multiple resonant controllers for single-phase uninterruptible power supply inverters is proposed in this study. This methodology is based on classical linear tools and consists ...

Voltage feedback is frequently used in class-D switching audio power amplifiers. This paper discusses the design and implementation of a low-cost filterless class-D, unipolar pulse-width modulation switching audio amplif...

This article presents the design and simulation-based evaluation of a 225 kW grid-interactive bidirectional fast DC charger for electric vehicles operating in both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) modes. T...

This article presents an light-emitting diode (LED) driver that actively reduces low-frequency output current ripple through a duty-cycle modulation scheme, enabling the use of compact film capacitors and eliminating ele...

The integration of solar energy into modern power grids supports sustainability and energy efficiency but also introduces power quality (PQ) challenges such as harmonic distortion, voltage sag, swell, and fluctuations. I...

The increasing adoption of Renewable Energy Sources (RES) is attributed to their sustainability, reduced environmental impact, and reliance on abundant natural resources. Microgrids are becoming more prevalent in existin...

The performance of Photovoltaic (PV) power generation systems, using traditional Vector Current Controllers based on Proportional–Integral Action (CVC-PI), exhibits marked non-linearity and is strongly influenced by me...