Buscar recursos académicos

By changing the temperature of chemical activation of plant biomass, nanoporous carbon materials with a specific surface area of up to 1050 m2/g were obtained. The obtained carbon materials were used to form composites w...

In this work, the morphological and electrical properties of the composite nanoporous carbon material/thermally expanded graphite or acetylene black have been investigated. Nanoporous carbon material was obtained from pl...

Porous carbon materials (PСM) with different pore distributions in size and size of the specific surface area up to 250 m2/g were obtained by changing the carbonization temperature of plant biomass, namely walnut shells...

For Fe-В and Fe-В-С system alloys one of the structure constituent is iron boride Fe<sub>2</sub>B but in the literature there is no information on carbon solubility limit in iron boride Fe2В. The object ...

The influence of point defect on the electronic and spatial structure of carbon nanotubes (8.0) have been studied depending on the placement vacancies in the structure of nanotubes. On the basis of quantum-chemical calcu...

In pursuit of manufacturing of carbon nanotubes (CNTs) in good yield at lower temperatures, a mixture of d-block elements such as Iron, Nickel, and Cobalt was expected to be advantageous because of the high yield and low...

The paper presents the experimental results of the hydrothermal synthesis composite materials based on the MoS2 and carbon using different types of detergents (cetyltrimethylammonium bromide and Triton-X) or microporous ...

The interaction of aqueous suspension of calcium chloride has been studied at different temperatures and at the duration of natural dolomite and solutions of sulfate acid and also carbon dioxide. Studied composition of f...

The influence of chemo-mechanical activation of dispersed carbon fibers in their turbostrate and quasicrystalline structure in terms of modeling frictional contact has been researched. It has been shown that change of pa...

The kinetics of diffusion of interstitial elements on the example of diffusion saturation with boron and silicon iron- carbon matrix ( - iron) was considered . The layers of intermetallic Fe - B - Si are formed and grow ...