Buscar recursos académicos

Introduction. Metaheuristic algorithms are effective for solving complex power system optimization problems characterized by nonlinearity, multimodality, and high dimensionality. Nature-inspired strategies based on adapt...

Hybrid energy storage systems have shown promise in enhancing solar panel systems reliability and efficiency. However, managing the power distribution balance with multiple energy storage units remains a challenge. This ...

The integration of solar energy into modern power grids supports sustainability and energy efficiency but also introduces power quality (PQ) challenges such as harmonic distortion, voltage sag, swell, and fluctuations. I...

A new methodology to design discrete-time multiple resonant controllers for single-phase uninterruptible power supply inverters is proposed in this study. This methodology is based on classical linear tools and consists ...

Power electronic systems in autonomous vehicles and mission-critical applications are highly susceptible to overheating due to operational inefficiencies. These systems often rely on liquid cooling loops to maintain safe...

Abstract High-electron-mobility transistors (HEMTs) based on wide bandgap (WBG) materials like gallium nitride (GaN) are vital for next-generation power electronics and high-frequency applications, offering high breakdow...

The main objective of this research work is to develop a new low-cost isolated three-level ac-dc power converter topology with a reduced number of switches. Existing three-level converter topologies change ac power to dc...

Integration of Photovoltaic (PV) generation into oil and gas power networks has transformed fault behaviour by creating highly complex sensitivity challenges for conventional Overcurrent Relay (OCR) coordination and trip...

Abstract This paper presents the optimization performance of non-uniform linear antenna array with optimized inter-element spacing and excitation amplitude using Particle Swarm Optimization (PSO). The aim of the proposed...

In this paper, permanent magnet synchronous generators, electrically excited synchronous generators, and hybrid excited synchronous generators are compared to evaluate the difference in performance and cost efficiency fo...

Abstract In this paper, it is demonstrated that the efficiency and ability to transfer power to the load in three-coil wireless power transfer (WPT) systems are always higher than in equivalent four-coil ones. On the oth...

The research introduces a 12-pulse D-STATCOM model developed and simulated to address voltage sag mitigation and power quality enhancement in unbalanced distribution feeders. It tackles critical power quality problems su...

This paper proposes a novel wireless power transfer system that integrates full-duplex communication functionality with negligible crosstalk between coupling coils. The system employs an LCC circuit as the overall topolo...

This study aims to test the effectiveness of sawdust as an alternative fuel to replace coal in a 50 MW power plant in an effort to reduce dependence on fossil fuels and have a negative impact on the environment. The use ...

Introduction. Nowadays, the most widely used wind energy conversion system in wind farms is based on a doubly fed induction generator (DFIG); it has a large speed range and can function in multiple modes. Problem. Harmon...

Abstract The signal digitization process of the open television system is still in progress, therefore, the study of the digital signal propagation has great importance so that broadcasters can develop and improve the tr...

Abstract We propose and experimentally investigate two distinct power-over-Fiber (PoF) approaches, aiming to remotely power Internet-of-Things (IoT) sensing systems for Industry 4.0 environments. The first proof-of-conce...

Abstract It is shown that proper representation of transmitting and receiving antennas in indoor environments are decisive for accurate prediction of electromagnetic power transfer parameters using the standard 3D-FDTD m...

AbstractThe condition for maximum power transfer of 2-coils wireless power transfer (WPT) system is derived from circuit analysis and discussed together with the respective WPT system efficiency (η). In the sequence, it...

This article presents an light-emitting diode (LED) driver that actively reduces low-frequency output current ripple through a duty-cycle modulation scheme, enabling the use of compact film capacitors and eliminating ele...

Standby techniques are widely employed in power systems to enhance safety and reliability, and are typically classified as hot, warm, or cold. Recent work has emphasized warm standby because it combines key advantages of...

The focus of this research is optimizing a wind power plant using a Permanent Magnet Synchronous Generator (PMSG). The backpropagation method of the artificial neural network system was chosen to optimize the output powe...

The main objectives of this study are to enhance the power extraction of photovoltaic (PV) systems under rapidly changing ecological circumstances using Maximum Power Point Tracking (MPPT) and to improve the power qualit...

Abstract Nowadays, communication and networking technologies are essential for Oil & Gas industries in order to guarantee reliability, safety and low costs in the producing process. Information access and commands and se...