Buscar recursos académicos

Materias / palabras clave: Technology: Engineering (General). Civil engineering (General): Mechanics of engineering. Applied mechanics

Materias / palabras clave: composite structures, composite materials, nanocomposites; Technology: Engineering (General). Civil engineering (General): Mechanics of engineering. Applied mechanics

In this work, a review and mathematical analysis of phenomenological models of residual strength and residual stiffness of polymer composite materials under fatigue loading have been carried out. The methodology of the a...

Over the last decades, the development of 3D textile composites has been driven the structures developed to overcome disadvantages of 2D laminates such as the needs of reducing fabrication cost, increasing through-thickn...

This study addresses the issue of nanoparticle agglomeration and the resulting inhomogeneous structure and performance degradation in Cu–Al₂O₃ composite coatings prepared by jet electrodeposition. To improve partic...

Gigi pasca perawatan saluran akar (PSA) biasanya mengalami kehilangan struktur gigi yang luas oleh karena karies, faktor iatrogenik, restorasi sebelumnya dan fraktur. Pengurangan dentin di dalam saluran akar akan menyeb...

Polymeric composites have been widely used in various structural and thermal aerospace applications. Polymeric composites having high strength and high modulus reinforcement are ideally suited for lot of critical aerospa...

Composite materials are utilized in many industries today due to its high performance and lightweight. However, the part manufacturing process of traditional composites is complicated and often involves high cost. The mo...

Abstract To address the demand for flow-induced vibration monitoring of steam generator heat transfer tubes in pressurized water reactors under high-temperature (350 °C) and high-pressure (17.5 MPa) conditions, a fi...

Crystalline and electronic structures of SiO2/Al2O3 mixtures have been analyzed using X-ray diffraction (XRD) and ultra-soft X-ray emission spectroscopy (USXES). Comparison of ultrasoft X-ray emission AlLα-, SiLα- and ...

Abstract The additive manufacturing of continuous fiber composites has the advantage of a high-precision and efficient forming process, which can realize the lightweight and integrated manufacturing of complex structures...

Fused deposition modeling is an additive manufacturing technique that enables complex structures to be fabricated layer by layer using thermoplastic filaments. The most common usage is based on the fact that polylactic a...

"Successful utilization of Additive Manufacturing (AM) in the space sector implicates two aspects: First, an understanding of the process inherent characteristics has to be developed, where the anisotropic behavior of ma...

Background and aim Membranes for guided bone regeneration should have a mechanical structure and a chemical composition suitable for mimicking biological structures. In this work, we pursue the development of periosteum-...

Laser processes for cutting, annealing, structuring, and printing of battery materials have a great potential in order to minimize the fabrication costs and to increase the electrochemical performance and operational lif...

This study investigates a novel combination of materials, incorporating pantyhose and rice husk, to develop sustainable insulation panel candidates, an approach that has not been previously explored in the literature. Pa...