Buscar recursos académicos

In modern construction, steel trusses remain one of the most common types of load-bearing structures used in the construction of industrial, civil, and public buildings. Their use is driven by high load-carrying capacity...

Abstract The simulation and planning system (SPS) requires accurate and real-time feedback regarding the deformation of soft tissues during the needle insertion procedure. Traditional mechanical-based models such as the ...

This work deals with numerical techniques to compute electrostatic fields in devices with rounded corners in 2D situations. The approach leads to the solution of two problems: one on the device where rounded corners are ...

It is a critical part at the basic design phase of aircraft structural design to build a finite element model and it will have a direct impact on time and cost for airframe structure development. In addition, the objecti...

Abstract Hydroformed parts are widely used in industrial automotive parts because of their higher stiffness and fatigue strength and reduced weight relative to their corresponding cast and welded parts. This paper report...

Abstract Re-entrant auxetic lattices exhibiting negative Poisson’s ratio behaviour are attractive for lightweight energy-absorbing applications. However, traditional re-entrant and hexagonal auxetic designs often exhib...

In view of the structural bearing performance issues of buried water diversion tunnels, the paper conducted a series of numerical simulation study on the joint bearing mechanism of steel lining-concrete lining-surroundin...

A new numerical model to describe the microstructural evolution of a eutectic nodular cast iron during its cooling is presented. In particular, equiaxial solidification assuming an independent nucleation of austenite and...

Abstract The processed surface contour shape is extracted with the finite element simulation software. The difference value of contour shape change is used as the parameters of balancing surface roughness to construct fi...

By introducing the artificial intelligence technology, on improved Nelder-Mead acceleration algorithm based on the neural network is proposed to obtain better optimization results. A back analysis method for construction...

The purpose of the present paper is to propose a novel approach of impact test system based on electromagnetic loading (EML) technology, which could provide more efficient and flexible experiment method with large range ...

The impact damage tolerance of fiber-reinforced laminated composite materials is a source of concern, mainly due to internal induced damage which causes large reductions on the strength and stability of the structure. Th...

Abstract A high-precision evaluation of ultrasonic detection sensitivity for a micro-crack can be restricted by a corroded rough surface when the surface microtopography is of the same order of magnitude as the crack dep...

Soft robotics is a rapidly evolving field that leverages compliant and deformable materials to create robotic systems capable of safe human interaction, environmental adaptability, and bio-inspired motion. Unlike rigid r...

This article considers the influence of local one-sided damage on the stress-strain state of a reinforced concrete beam. The research is aimed at analyzing changes in load-bearing capacity, deformations, and potential fa...

Coherent perfect absorption (CPA) has been studied in various fields, such as metasurface, photonics, and acoustics, because of its ability to perfectly absorb light at a specific wavelength. However, the narrow bandwidt...

Abstract The uncontrolled floor heave in gob-side entry retaining is the serious problem of underground coal mining. This phenomenon has gravely restricted the application of pillarless mining that has been increasingly ...

A large-diameter steel tube pile is used in a machinery factory in Shanghai to test the new produced diesel pile hammer. However, with the increase of the diesel hammer weight, it fails to meet the test requirements and ...

Surface texturing is helpful in decreasing the friction, decreasing the wear, and increasing the fluid film stiffness. This investigation studies the influence of micro-pit arrangement on the behavior of gas parallel sli...

As the core component of the electromagnetic force compensation weight detector, the force measurement sensitivity of the integrated flexible hinge sensor directly determines the resolution of the electromagnetic force c...

In this study, an all-optical multiplexer (Mux) based on elliptical insulator-metal-insulator (IMI) plasmonic waveguides is designed. The area of the proposed structure is very small (400 nm × 400 nm) which oper...

In this paper we present a summary of numerical methods for solving free surface and two fluid flow problems. We will focus the attention on level set formulations extensively used in the context of the finite element me...

Abstract Accurate quantification of external force is the key to improve the high-precision hemming of autobody closure panels. However, the mechanism of external force on forming quality of complex contour sheet metal w...