Buscar recursos académicos

Objectives: To compare the effects of airborne-particle abrasion (APA) and tribochemical silica coating (TSC) surface treatment methods on the shear bond strength of zirconia ceramics systems, resin cements and tooth sur...

Abstract It can be known from a large number of research results that improving the dispersibility of CNTs can effectively optimize the mechanical properties of the corresponding metal matrix composites. However, the cru...

Several metal-organic framework (MOF) materials have been recently employed in optoelectronic devices due to the unique properties of the MOF materials that result in enhanced performance and stability. In this work, the...

PLA coating on Kraft paper is very promising systems for food packaging, and has potential environmental advantages over conventional synthetic paper coatings. This work was focused on: (i) analyzing the physicochemical,...

Abstract This work conducts a comprehensive numerical study of a concentrated photovoltaic–thermal (CPVT) system equipped with a V-trough reflector, with the objective of enhancing output power under realistic operatin...

Poly(N-acryloylmorpholine) (P(NAM))-based materials have been developed to prevent protein adhesion to surfaces due to their biocompatibility and protein-repellent properties. However, transferring the benefits of P(NAM)...

ZnO nanorods (ZnO NRs) were grown on ZnO seeded polyethylene tert-phtalate (PET) substrates obtained from recycled soda bottles at low temperatures (90 °C) from Zn2+ precursors in alkaline aqueous solution. The ZnO seed...

The increasing global temperatures have escalated the demand for indoor cooling, thus requiring energy-saving solutions. Traditional approaches often integrate metal layers in cooling windows to block near-infrared (NIR)...

To achieve an optimal trade-off between processing efficiency and dimensional precision in the assisted electrode electrochemical discharge machining (AE-ECDM) of thermal barrier coating (TBC)-coated superalloys, a 1D co...

Abstract Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of coated granulated calcium iodate anhydrous as nutritional feed additive for all anim...

The soft liner of acrylic resin dentures, used to coat removable partial dentures, still has drawbacks in the easy attachment of Candida albicans fungus. A treatment on the surface of the acrylic resin denture soft liner...

En este trabajo se presenta un estudio sobre la conmutación de la resistencia eléctrica en dispositivos formados por estructuras metal - óxido - metal. Se estudiaron dos óxidos paradigmáticos por el tipo de mecanism...

ABSTRACT Hydroxyapatite (HA) is widely used as a biomaterial for bone repair and metallic prostheses coating. The main limitations of the current commercial synthetic hydroxyapatite compounds include high cost and decrea...

The paper is dedicated to the development of effective composite coatings with the use of carbon fillers of different morphology, their research, and application in the broadband frequency range. Electromagnetic loss stu...

The study was conducted at laboratory experiment included a completely randomized design (CRD) to study the efficiency of NPK-Chitosan fertilizers derived from shrimp shells with a ratio of1:1,1:2and 1:3 (NPK-Chitosan) (...

High entropy alloy (HEA) coatings deposited via graphene powder mixed Micro EDC process, demonstrates enhanced corrosion resistance of Mg-alloys for implant applications. Utilizing a present process, the HEA coatings hav...

Background GastroGard, an omeprazole powder paste formulation, is considered the standard treatment for gastric ulcers in horses and is highly effective. Gastrozol, an enteric‐coated omeprazole formulation for horses, ...

Stable and adherent polypyrrole films have been successfully electrodeposited onto aluminium electrode over a wide solution pH interval by using sodium bis(2-ethylhexyl) sulfosuccinate as dopant. The redox behaviour of t...

The growth and ordering of the anodic aluminum oxide layer depend strongly on the initial roughness of the substrate and consequently on the different pretreatment stages. The objective of this study was to select the b...

Germanium selenide (GeSe) nanosheets are stable and inexpensive and considered to have a great potential for photovoltaic applications, however we have demonstrated that GeSe nanosheets are also promising for sensing tec...

The materials for medical application are normally consisted of metal, ceramic, and polymer. Each material has its own limitations such as corrosion in metal, the brittleness of ceramic, and the high temperature problem ...

Abstract As an important green manufacturing process, dry grinding has problems such as high grinding temperature and insufficient cooling capacity. Aiming at the problems of sticking and burns in dry grinding of titaniu...

Optical sensors typically provide compact, fast and precise means of performing quantitative measures for almost any kind of measurand that is usually probed electronically. High-contrast grating (HCG) resonators are kno...

In analogy with spatial multilayers, we put forward the idea of Herpin equivalence in temporal metamaterials characterized by step-like time variations of the constitutive parameters. We show that, at a given frequency, ...