Buscar recursos académicos

Abstract This paper focused to enhance the mechanical and microstructural properties of Al 7475 alloy by incorporating Si₃N₄/TiO2 hybrid ceramic particles in developing composites through Friction Stir Welding (FSW...

Several forms of niobium oxide were prepared, including nanostructured mesoporous materials, and their acidity properties were comprehensively investigated and compared with commercially available materials. The composit...

Abstract In the present investigation, friction stir processing (FSP) is implemented to develop the tungsten carbide (WC) nanoparticle-reinforced aluminum alloy Al6061-T6. The tensile properties of the Al6061-T6/WC surfa...

Halide perovskite quantum dots (PQDs) have exhibited significantly superior nonlinear optical properties compared to traditional semiconductor materials thanks to their peculiar physical and electronic structures. By fur...

Abstract The use of textile fibre-reinforced composite materials for many alternative applications has significantly increased in the twenty-first century due to their lightweight nature and high strength-to-weight ratio...

The mechanical alloys-composite MАs (Mg +10 % wt.Ti + 5 % wt.Y and Mg +10 % wt.Ni + 5 % wt.Y) were synthesized. The phase content, microstructure, the thermal stability, kinetics of hydrogen desorption from the MgH2 hyd...

We present a magnetically actuated vocal fold–phantom phonation system capable of reproducing longitudinal tension modulation to mimic cricothyroid (CT) and thyroarytenoid (TA) muscle activation. We first formulat...

This research aims to develop polyurethane foam using recycled PET (Polyethylene Terephthalate) and HDPE (High-Density Polyethylene) plastic bottles as substitutes for polyol. Waste PET bottles were recycled through a gl...

In the present work, the mechanical performance of polylactic acid (PLA) based composites reinforced with hydroxyapatite (HA) or β-tricalcium phosphate (β-TCP) was investigated. The polymer was melt compounded with 1 a...

Enhancing the interfacial bonding performance between carbon fibers (CF) and thermoplastic resins is extensively researched. In this study, we propose a novel method for the synergistic surface modification of carbon fib...

3,4-Dinitrofurazanfuroxan (DNTF) is a highly energetic material with high sensitivity. For its handling safety, preparation of polymer-bonded composites is an effective approach. In this study, thermoplastic polyurethane...

Abstract The research deals with the concept of hiding information in one of the media where the 'Least Significant bit' which is one of the methods of steganography is used. Satellite images were chosen as a means of hi...

To investigate the dynamic mechanical behavior and fragmentation characteristics of layered rock under the combined effects of chemical corrosion and impact loading, split Hopkinson pressure bar (SHPB) tests were perform...

Over the last decades, the development of 3D textile composites has been driven the structures developed to overcome disadvantages of 2D laminates such as the needs of reducing fabrication cost, increasing through-thickn...

ABSTRACT Wood-cement composite (WCC) is a potential construction material for tropical regions, due to its physico-mechanical properties and resistance to decay and fungi attack. However it is important to test alternati...

Abstract Engineered cementitious composites (ECC) are ductile cement-based materials developed to overcome the brittleness of conventional concrete by exhibiting strain-hardening behaviour and improved crack control unde...

Geopolymers are known for its high compressive but low tensile strength due to its brittle nature, which restricts the use of geopolymers as structural material. It is important to enhance their mechanical performance by...

Polymeric composites have been widely used in various structural and thermal aerospace applications. Polymeric composites having high strength and high modulus reinforcement are ideally suited for lot of critical aerospa...

Abstract Green composites are increasingly attracting interest due to their potential to address environmental issues by merging sustainable fillers with biodegradable polymers. The current study investigates the incorpo...

Abstract It can be known from a large number of research results that improving the dispersibility of CNTs can effectively optimize the mechanical properties of the corresponding metal matrix composites. However, the cru...

We consider a system of composite bosons given by strongly bound fermion pairs tunneling through sites that form a low-dimensional network. It has been shown that the ground state of this system can have condensatelike p...

In order to study the influence of non-uniform distribution of fine soil on mechanical properties of coarse-grained soil under freeze-thaw cycles, triaxial shear tests are conducted on different specimens with different ...

The spinning industries negatively impact the environment by generating substantial process waste. Unlike previous studies that primarily focus on recycling textile waste, this study explores a sustainable practice by in...

Abstract This study examines the thermo- and photo-oxidative degradation of bio-based polyamide 5.10, both neat and reinforced with 20 wt% regenerated cellulose fibers (RCF). The materials were additionally modified with...