Buscar recursos académicos

Abstract Achieving accurate speed prediction provides the most critical support parameter for high-level energy management of plug-in hybrid electric vehicles. Nowadays, people often drive a vehicle on fixed routes in th...

Wireless Sensor Networks (WSNs) are extensively used in applications such as environmental monitoring, surveillance, and smart security, but their performance is limited by the restricted energy capacity of sensor nodes,...

Abstract The current research on noncircular hobbing mainly focuses on the linkage model and motion realization. However, the intermittent cutting characteristics of hobbing would increase uncertainties in the manufactur...

Abstract The rapid development of the Fifth Generation (5G) networks encourages researchers to improve the Radio over Fiber (RoF) technique to achieve data rates of 10 Gbps and beyond. That led to a significant increase ...

Abstract A design of a blade antenna embedded in low-cost dielectric substrate (FR4) and operating at 4.97 GHz is the subject of this paper. The antenna design is accomplished using parametric analysis in the HFSS™ sof...

This paper proposes a novel wireless power transfer system that integrates full-duplex communication functionality with negligible crosstalk between coupling coils. The system employs an LCC circuit as the overall topolo...

Abstract This paper presents an eyebolt structural fault detection system, based on the analysis of multiple electromagnetic parameters through a random forest classifier trained by both measurements and high-fidelity si...

Abstract An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades. However, few papers systematically review these researches. By analyzing exi...

Abstract This paper describes the development of a double-sided band-pass frequency selective surface based on Matryoshka geometry, preserving features such as miniaturization, multiband operation and stability of polari...

Abstract Current and displacement stiffness are important parameters of axial magnetic bearing (AMB) and are usually considered as constants for the control system. However, in actual dynamic work situations, time-varyin...

Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonl...

Abstract In this paper, an in-depth study of the electrical and optical characteristics of Polymer Light Emitting Diodes ITO/PEDOT: PSS/DP-PPV derivatives/Al(Ca) is presented. Three polymer materials are considered; poly...

Abstract The productivity decline of technological wells during in situ leaching (ISL) is primarily associated with clogging of well filters and the near-filter zone, leading to a significant increase in hydraulic resist...

This study presents a new strategy to improve security and efficiency in Machine-Type Communication (MTC) networks, addressing the drawbacks of the existing Adaptive Hierarchical Group-based Mutual Authentication and Key...

- In this study, we investigate the potential of using state-of-the-art neural network architectures to increase the accuracy in classification of Quranic recitations per verse. Using a dataset of more than 4000 audio re...

Dynamic gesture recognition is a core technology for human–computer interaction, yet existing methods face prominent limitations in hand spatial topology modeling, long–short-term temporal feature fusion, and general...

Abstract This paper presents an evaluation of multicarrier channel sounding techniques using different random and pseudo-random sequences to modulate the OFDM sounding signal. The Random (Rand), Pseudo-Noise (PN) and Zad...

Abstract This paper discusses the through-wall detection of targets behind walls using an ultra-wideband radar operating in the 2 to 15 GHz frequency range. Tests were conducted to verify its use with static and moving t...

Abstract The design of aircraft hydraulic pipeline system is limited by many factors, such as the integrity of aviation structure or narrow installation space, so the limited clamp support position should be considered. ...

It is common to use Autoclaved Aerated Concrete (AAC) blocks in the construction of partition walls and infills because of their distinctive properties, including ease of work, energy conservation, and enhanced sustainab...

Abstract This paper describes an experimental and numerical investigation of the dielectric resonators based on the MgTiO3 ceramic matrix, which relates to their dielectric properties in microwave. The resonators are com...

Generative Artificial Intelligence (GAI) is changing what can be done with Recommender Systems (RS) in e-commerce by allowing much more interactive, situationally aware, and highly tailored experiences for users. The pur...

This paper presents a FEM analysis of a hybrid excitation brushless axial flux machine (HEBAFM) for traction electric vehicle purposes in order to compare with the results from an analytical method used to determine the ...

Abstract At present, the water-cooling simulation of the water-cooled magnetic coupler is based on the water-cooled motor and the hydraulic coupler, which cannot accurately characterize the temperature distribution of th...