Buscar recursos académicos

With the expanding use of woven composites in critical load-bearing applications under harsh environmental conditions, it is essential to evaluate how hygrothermal exposure affects their performance. This study aims to s...

The development of miniaturized, flexible MEMS pyrotechnic devices necessitates advanced fabrication techniques. Herein, a strategy is reported that leverages the integration of ink-jet printing and dynamic cross-linking...

To investigate the effect of boron nitride (BN) content on the explosion performance of on-site mixed emulsion explosives, the microstructure of BN-containing on-site mixed emulsion explosives were characterized by trans...

Abstract CO2 curing can greatly enhance the properties of concrete while actively sequestering CO2. However, the influencing mechanisms of CO2 curing on the passivation film of steel bars in concrete remains unclear. In ...

For Fe-В and Fe-В-С system alloys one of the structure constituent is iron boride Fe<sub>2</sub>B but in the literature there is no information on carbon solubility limit in iron boride Fe2В. The object ...

In this work by using sol-gel auto-combustion synthesis was synthesized single-phase magnesium-substituted lithium ferrite at different pH reaction medium. The synthesized materials were investigated by X-ray and Mossbau...

Steel fiber (SF) cement mortar, renowned for its dual advantages of strength and toughness, is widely used in construction, transportation, and other engineering fields. However, in actual service, it often faces challen...

The main objective of this study is to investigate the electrical properties of Sn–3.0Ag–0.5Cu solder joint with the incorporation of carbon nanotube instead of solder bulk. Sn–3.0Ag–0.5Cu solder paste with the i...

Abstract This study employs advanced electrochemical and surface characterization techniques to investigate the impact of electrochemical hydrogen charging on the corrosion behavior and surface film of the Ti-6Al-4V allo...

Abstract TiAlSiN is a potential protection coating for die steel to improve the surface hardness, anti-wear performance and suitability. In the present study, TiAlSiN is deposited on H13 die steel by high power impulse m...

The development of efficient nonstoichiometric redox materials for solar-driven H₂O/CO₂ splitting via two-step thermochemical cycles requires optimization of redox thermodynamics, kinetics, and material stability. Th...

Abstract It can be known from a large number of research results that improving the dispersibility of CNTs can effectively optimize the mechanical properties of the corresponding metal matrix composites. However, the cru...

Metallic helical metamaterials have become the prominent candidates for circular polarizers and other optical-chiral devices as they exhibit strong circular dichroism at a broad operation bandwidth. However, the rapid fa...

Abstract Penetration and non-penetration lap laser welding is the joining method for assembling side facade panels of railway passenger cars, while their fatigue performances and the difference between them are not compl...

The mechanical alloys-composite MАs (Mg +10 % wt.Ti + 5 % wt.Y and Mg +10 % wt.Ni + 5 % wt.Y) were synthesized. The phase content, microstructure, the thermal stability, kinetics of hydrogen desorption from the MgH2 hyd...

Abstract Sodium carbonate-activated slag mortar (SCASM) exhibits the advantages of low shrinkage, high strength in late age, and low-cost and carbon emissions. However, its microstructure is relatively porous due to the ...

The influence of alloy element distributions on austempered ductile iron microstructure and austempering treatment was analysed by a cellular automaton model that considers the ausferritic and martensitic transformations...

Abstract The aim of this study was to evaluate quality characteristics of pork myofibrillar protein (MP) added with cornstarch as affected by different pH values and salt cocnentrations. MP mixtures were prepared with th...

Isothermal section of the Lu-Ag-Si system at 500ºC was studied by means of X-ray powder diffraction, microstructure and EDX-analyses in the whole concentration range. The existence of earlier reported binary compounds L...

Abstract With the growing interest in utilizing Mg and austenitic stainless steel (ASS) in the automotive sector, joining them together in three-sheet configuration is inevitable. However, achieving this task presents co...

Background Postmenopausal osteoporosis (PMOP) is characterized by exacerbated bone resorption and inadequate bone formation, with macrophage-driven inflammation playing a key role. However, how immunometabolic reprogramm...

Abstract The space microgravity environment, scarcely attainable on Earth, is considered to have a positive effect on crystal growth, especially the van der Waals layered materials with low interlayer sliding energy barr...

Abstract Increasing demands for sustainable manufacturing are accelerating the need for efficient scrap reutilization routes that extend beyond conventional remelting practices. In this context, solid-state reuse of mach...

Abstract In modern fossil and nuclear power plants, the components are subjected to creep, fatigue, and creep-fatigue (CF) due to frequent start-up and shut-down operations at high temperatures. The CF interaction on the...