Buscar recursos académicos

Background: Conventional glass ionomer cement (GIC) is widely used as a restorative base and liner owing to its chemical adhesion to dentine, fluoride release, and favourable biocompatibility. Nevertheless, its intrinsic...

Objective: To assess how resin cement viscosity and thickness influence the static shear bond strength (s-SBS) of adhesively bonded lithium disilicate ceramic. Methods: Cylindrical lithium disilicate samples were prepare...

Recycling of construction waste is essential for sustainable cement-based materials, yet the variable composition of recycled autoclaved aerated concrete (AAC) powder pose significant challenges when used in grouting app...

Industrial symbiosis offers a critical pathway for advancing resource circularity and energy efficiency in hard-to-abate sectors. As the steel and cement industries undergo profound structural transformation toward low-c...

Interlocking concrete pavers (ICPs) require substantial cement consumption, resulting in considerable embodied carbon emissions, while the regional availability of conventional supplementary cementitious materials is bec...

This study prepared a series of NH2-MIL-125(Ti) samples (denoted as NMT-x%) by tuning the methanol fraction (20%, 30%, 40%, and 50%) in a mixed methanol/N,N-dimethylformamide (MeOH/DMF) solvent system, and investigated t...

Reinforced concrete (RC) piers have been widely studied and applied in bridge construction practice. To ensure the normal operation of RC piers under corrosive environments and seismic effects, new corrosion-resistant ma...

This review provides a comprehensive examination of carbon capture (CC) technologies, utilization and their integration with e-fuel production as pivotal factors in determining the greenhouse gas (GHG) mitigation potenti...

Microalgae are promising platforms for CO2 mitigation. However, high CO2 exposure can impose physiological and environmental constraints, such as acidification and disruption of cellular homeostasis, which impair sensiti...

Aims: Assessing the effect of different surface pretreatments, that is, sulfuric acid (SA), air-particle abrasion (APA), Er, Cr: YSGG laser, and nonthermal plasma (NTP)on the push-out bond strength (PBS) and surface roug...

Introduction and aims: This study investigated the synergistic effect of combining 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) and γ-methacryloxypropyl trimethoxysilane (γ-MPTS) in one primer on bonding to li...