Buscar recursos académicos

This study addresses the issue of nanoparticle agglomeration and the resulting inhomogeneous structure and performance degradation in Cu–Al₂O₃ composite coatings prepared by jet electrodeposition. To improve partic...

The evolution of hardness in an Al-Cu-Mg based alloy with high Cu:Mg ratio (= 2, at. %) microalloyed with Si and Ge was studied during artificial ageing treatment performed at 190 °C. The results were compared to those ...

Limosilactobacillus fermentum Lf2 (Lf2) and Bifidobacterium animalis INL1 (INL1) are two autochthonous probiotic strains that produce exopolysaccharides (EPS), and some of these molecules were associated with health-prom...

The excellent mechanical properties, high thermal conductivity and corrosion resistance combined with moderate cost make superferritic stainless steels (SFSS) commercially attractive. Though these steels are finding incr...

Residues discarded at cherry fruit harvesting were extracted with ethanol from ‘Chelan’, ‘Brooks’ and ‘Sunburst’ varieties to obtain cherry fibers constituted by the cell wall polysaccharides, applicable as f...

Composite films based on chitosan, glycerol and magnetic iron oxides were obtained by two different procedures: in situ generation of iron oxide particles in the already formed films and dispersion of previously synthesi...

The corrosion behavior of two wrought super duplex stainless steels (SDSS), UNS S32750 and UNS S32760, and a cast duplex stainless steel (DSS), DIN/EN 1.4517, was evaluated in 3.5 wt% NaCl and ASTM D1141 synthetic seaw...

For the X80 pipeline steel, electrochemical impedance spectroscopy and potentiodynamic polarization curves were employed to examine the electrochemical corrosion behaviors of its base metal and weld joint under varying t...

The inadequate corrosion resistance and conductivity of metal bipolar plates are major obstacles to the commercialization of proton exchange membrane water electrolysis (PEMWE). In this work, Nb/NbN/Mo-containing NbN mul...

Objective: To explore the application value of DTI combined with DTT in brain function and volume in children with autism. Methods: A total of 616 children with autism diagnosed from January 2020 to December 2022 (ASD gr...

The development of efficient nonstoichiometric redox materials for solar-driven H₂O/CO₂ splitting via two-step thermochemical cycles requires optimization of redox thermodynamics, kinetics, and material stability. Th...

Bobbin tool friction stir welding (BT-FSW) is a solid-state joining technique that produces high-strength welds without the need for backing plates. This study introduces a new variant, termed hybrid bobbin tool friction...

Contamination with anthropogenic debris, such as plastic and paint particles, has been widely investigated in the global marine environment. However, there is a lack of information regarding their presence in marine prot...

Localized corrosion in laser–arc hybrid welded high-nitrogen steel joints is strongly affected by microstructural heterogeneity. This study focused on the effect of welding speed on dendritic connectivity and the corre...

In this study, WTaNbMo refractory high-entropy alloy (RHEA) coatings were successfully fabricated on Inconel 718 substrate by laser cladding. Optimal coatings with superior comprehensive performances were systematically ...