Buscar recursos académicos

Nickel salts of Keggin heteropolytungstates with the general formula NixAyW12−yO39or40 (A = Si/P) were synthesized and studied as bulk catalytic materials or supported ones by deposition on modified and functionalized ...

Single-atom catalysts (SACs) and dual-atom catalysts (DACs) have emerged as promising materials for activating persulfate (PS) in advanced oxidation processes (AOPs) aimed at degrading organic pollutants. This review sys...

Heterogeneous catalytic ozonation(HCO) has garnered significant attention in the field of water treatment due to its exceptional capability to mineralize organic pollutants. This technology enhances the degradation and m...

Background: The main purpose of the naphtha reforming process is to obtain high octane naphtha, aromatic compounds and hydrogen. The catalysts are bifunctional in nature, having both acid and metal sites. The metal funct...

A series of Ni supported over MgAl2O4–CeO2 catalysts have been prepared by the wet impregnation method as catalysts for steam ethanol reforming. The synthesis was performed using nitrilotriacetic acid (NTA) or citric a...

Deactivation and regeneration of Pt/Al2O3 catalysts during the hydrodechlorination of carbon tetrachloride were studied. The effect of reactant partial pressures and temperature on the catalyst deactivation was investiga...

DCM is classified among the most hazardous atmospheric pollutants and therefore, the development of safe methods for the disposal of residual DCM is of great importance. Activated carbon- supported catalysts containing p...

Near-surface molecular-beam mass spectrometry (ns-MBMS) is a highly sensitive and non-destructive method for temporal monitoring of catalytic conversions on solid surfaces, yet not widely applied in heterogeneous catalys...

Selective electrochemical CO₂ reduction to multi-carbon products remains a central bottleneck for carbon-neutral chemical manufacturing, with most catalysts achieving C₂⁺ Faradaic efficiencies below 75%. This inves...

Pure (KNbO3) and titanium-substituted (KTi0.1Nb0.9O3 and KTi0.2Nb0.8O3) potassium niobates with perovskite crystalline structures were prepared, characterized and tested as catalysts in the selective oxidation of 2-(meth...

The transesterification reaction of soybean oil with methanol is studied with different gAl2O3 heterogeneous catalysts. The catalysts used are K-gAl2O3, Na-gAl2O3, Li-gAl2O3, Ca-gAl2O3 and Ba-gAl2O3 both 5% and 10% in me...

Different basic materials, such as K-L zeolite, K-Al2O3, K-Mg/Al mixed oxide and MgO, were used as supports of Pt-catalysts for the dry reforming of methane (DR) reaction. The effects of the distribution of basic strengt...

The reduction of carbonyl compounds, including ketones and aldehydes, to alcohols is a fundamental and important reaction in organic synthesis. One of the most ideal methods is catalytic hydrogenation, however, the hydro...

The influence of the solvent (water, acetone, and ethanol) used during alumina impregnation on the properties of Pt/Al2O3 and Pt−Sn/Al2O3 catalysts was studied. Catalysts were characterized by H2 chemisorption, TEM, te...

The influence of the preparation method on the properties of lanthanum-doped hematite prepared with potassium carbonate was studied aiming to get catalysts for styrene production from ethylbenzene dehydrogenation. The mo...

Iron modified mesoporous silica structures were achieved from biomass-derived renewable molding agents (glyceryl monostearate and glycerol) and can become potential substitutes for conventional mesoporous catalysts synth...

Platinum catalysts supported on zeolite KY (Si/Al = 12.7), modified with magnesium, calcium or barium, were evaluated in n-octane reforming to produce ethylbenzene. The catalysts were characterized by nitrogen adsorption...

A regional raw clay was used as the starting material to prepare iron-pillared clays with different iron contents. The catalytic activity of these materials was tested in the heterogeneous photo-Fenton process, applied t...

ABSTRACT Proton exchange membrane water electrolysis (PEMWE) is a compelling route for sustainable green hydrogen production. Yet Ir‐based oxygen evolution reaction (OER) catalysts suffer from a persistent trade‐off ...

Mn-Cu mixed oxides were deposited by ultrasonic impregnation on ceramic honeycomb monoliths. Its catalytic performance was evaluated in the combustion of ethanol and n-hexane, VOC molecules of different chemical nature. ...

A series of palladium-based catalysts were synthesized by grafting a silylated imidazolium ionic liquid onto two types of silica supports: mesoporous SBA-15 and commercial silica. The ionic liquid served as both a stabil...

The formation of NiAl2O4 during calcination and the subsequent generation of Ni–oxygen vacancy (Ni–Ov) interfaces during H2 reduction play a crucial role in suppressing coke formation in the dry reforming of methane ...

Hydrogen is widely considered a promising green energy vector. It may be produced by steam reforming of methane which may be obtained from renewable resources such as biogas or biomass gasification. Nickel catalysts supp...

Palladium and cobalt bimetallic catalysts supported on sulfated zirconia (PdCo/SZ), obtained from different precursors of Pd (nitrate and acetylacetonate), were prepared to study their influence on the selective reductio...