Buscar recursos académicos

Communication delays within connected and autonomous vehicles (CAVs) pose significant risks. It is imperative to address these issues to ensure the safe and effective operation of CAVs. However, the exploration of commun...

Abstract Microstrip filters are widely employed in radio fre-quency and microwave circuits due to their efficiency, easy fabri-cation, and compatibility with printed circuit board technologies. In this scenario, this wor...

Abstract In recent years, additive manufacturing (AM) has gained popularity in the aerospace, automobile, and medical industries due to its ability to produce complex profiles with minimal tolerances. Micro-milling is re...

It is common to use Autoclaved Aerated Concrete (AAC) blocks in the construction of partition walls and infills because of their distinctive properties, including ease of work, energy conservation, and enhanced sustainab...

Abstract This paper describes an experimental and numerical investigation of the dielectric resonators based on the MgTiO3 ceramic matrix, which relates to their dielectric properties in microwave. The resonators are com...

Abstract Multi-component nanofluids have attracted increasing attention for advanced heat transfer and energy systems; however, experimental data on oxide-based quadri-hybrid nanofluids, particularly regarding their coup...

Abstract Failures of flexible pavements have been attributed to the indiscriminate use of lateritic soils without prior characterisation. This study investigates the compaction behaviour of lateritic soils at Ife-Sekona ...

Designing and engineering microresonator dispersion are essential for generating microresonator frequency comb. Microresonator frequency combs (microcombs, Kerr frequency combs) offer the potential for various attractive...

Abstract Complicated tribological behavior occurs when human fingers touch and perceive the surfaces of objects. In this process, people use their exploration style with different conditions, such as contact load, slidin...

A robotic arm with five degrees of freedom has been developed for use in learning laboratories. The arm's movements were designed and simulated in SOLIDWorks and LabVIEW. The LabVIEW Softmotion was used to impose motion ...

In the present work the existente of mass transfer limitations in slurry, photocatalytic reactors is studied. Experimental validation is made in a flat plate reactor that is part of a recycling system. The reactor is des...

Abstract Due to the different microstructures caused by the heat source effect, welding joints exhibit significant differences in mechanical properties compared to the base material. Precise characterization of the const...

Abstract Photovoltaic (PV) systems have become one of the most important solutions to sustainable energy production due to the growing demand of renewable energy and the necessity to harness energy in the most efficient ...

Abstract Current and displacement stiffness are important parameters of axial magnetic bearing (AMB) and are usually considered as constants for the control system. However, in actual dynamic work situations, time-varyin...

Abstract The productivity decline of technological wells during in situ leaching (ISL) is primarily associated with clogging of well filters and the near-filter zone, leading to a significant increase in hydraulic resist...

Downhole Dynamic Compaction (DDC) piles are the most widely used technique for the mitigation of loess foundation collapsibility. While previous studies have extensively verified their macro-mechanical improvement perfor...

Abstract The hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulation or soft starting. In the mixed friction stage, the contact, friction...

The main objectives of the study are to develop a generalized thermo-electromechanical model of a solid-state heat engine based on a Ni-Ti-Cu shape memory alloy for converting low-grade thermal energy (30-100 °C) into e...

This paper presents a theoretical and experimental comparison of two techniques of optical fiber current sensors (OFCS) based on the Faraday Effect: the power and the degree of polarization (DOP) methods. The DOP method ...

Prior validation against well-documented benchmark experiments is essential for establishing a reliable computational foundation for liquefied natural gas (LNG) vapor dispersion simulations in safety assessments and haza...

Tartaric acid (TA), a valuable organic acid with widespread applications in food, pharmaceutical, and chemical industries, is predominantly found in grapes and winery by-products. This study investigates the physical ext...

The aim of this work is to create the scientific foundations of microwave extractors implementing the effect of mechanodiffusion discovered by the authors, as well as visual, kinetic, and energy substantiation of the fun...

The analysis and modeling of educational data are of great significance to the evaluation of teaching quality and personalized learning guidance. However, the acquisition of academic data is often limited by the costs of...

With the expanding use of woven composites in critical load-bearing applications under harsh environmental conditions, it is essential to evaluate how hygrothermal exposure affects their performance. This study aims to s...