Buscar recursos académicos

The necessity to reduce the weight of transport structures, such as cars and airplanes, has become more important due to gas emission regulations. In this regard, the use of hybrid structures made of steel and aluminum i...

Abstract Currently, conventional single-sided friction stir welding is primarily suitable for joining thin plate aluminum alloys, and its application to thick plates is still challenging in terms of welding efficiency an...

With the continuous improvement of lightweight requirements for equipment, Mg alloys are increasingly widely used, and their joining with traditional steel materials is essential. However, Mg and Fe have almost no solid ...

As the water pressure of shield tunnel increases, the key to tunnel construction is to strengthen the water resistance of joints. By analyzing the characteristics of stress and deformation of the gaskets in the joints of...

Abstract Penetration and non-penetration lap laser welding is the joining method for assembling side facade panels of railway passenger cars, while their fatigue performances and the difference between them are not compl...

Concrete-filled steel tubular (CFST) truss arch bridges are widely used in long-span bridge construction due to their high strength, good stiffness, and excellent durability. However, arch rib joints, as critical load-be...

The present study focused on the evaluation of critical influencing parameters of the FSW of AA6061-T6 and AA2024-T351 alloys. The materials properties of AA6061-T6 are heat-treatable alloys possessing properties of good...

Abstract 6082-T6 aluminum alloy is a commonly used aluminum alloy material in the field of rail transit because of its good molding properties, high mechanical properties, excellent corrosion resistance and weldability. ...

Butt welding between SLM-formed AlSi10Mg and rolled 6061 alloy (T6 state) was conducted by the tungsten inert-gas arc welding(TIG) method. The microstructure and mechanical properties of TIG welded joints under different...

A study on the microstructure, mechanical properties, and heat treatment process of pure tantalum TIG joints was conducted. Industrial computed tomography (CT), OM, and SEM were used to characterize the microstructure of...

In the present study, 22 hip joints of Whippet (four), Rottweiler (five) and Labrador Retriever (two) young dogs were evaluated with the aim of comparing the ultrasonic examination of coxofemoral joints with the radiogra...

In modern construction, steel trusses remain one of the most common types of load-bearing structures used in the construction of industrial, civil, and public buildings. Their use is driven by high load-carrying capacity...

Materias / palabras clave: Joints; Articulaciones; Muscles; Anatomy; Músculos; Anatomía

Materias / palabras clave: Biomechanics; Joints; Physiology; Physical therapy; Biomecánica; Ortopedia; Fisiología humana; Terapia

Materias / palabras clave: Physical education and training; Joints; Range of motion; Educación física

Materias / palabras clave: Physiology; Fisiología; Human mechanics; Mecánica humana; Joints; Articulaciones

Materias / palabras clave: Articulaciones; Movimiento; Medición; Joints; Range of motion; Measurement

Materias / palabras clave: Joints; Diseases; Medicina

Materias / palabras clave: Metallurgy; Welded joints; Metalurgia; Soldaduras

Materias / palabras clave: Artificial joints; Surgery; Articulaciones; Prótesis; Cirugía