Buscar recursos académicos

Lean duplex stainless steels (LDSS) emerged as a competitive duplex stainless steels (DSS) where Ni is partially replaced by lower cost alloying elements such as Mn and N. However, to date there has been little to no inf...

This study addresses the issue of nanoparticle agglomeration and the resulting inhomogeneous structure and performance degradation in Cu–Al₂O₃ composite coatings prepared by jet electrodeposition. To improve partic...

Abstract A fiber laser was used to perform multiple laser cladding passes on AISI 1045 steel to fabricate SiC particle-reinforced Ni60A alloy coatings. The microstructure and phase composition of the cladding layers were...

Abstract In this study, aluminium (Al) matrix composites reinforced with 0, 5, and 10 vol% silicon carbide (SiC) particles were fabricated by direct hot-pressing under 35 MPa pressure at 600 °C for a holding time of 5...

Objective: To investigated how post-curing times of 10 minutes and 20 minutes affect the mechanical properties and surface characteristics of LCD-printed denture base resin. Materials and Methods: Ninety standardized spe...

Butt welding between SLM-formed AlSi10Mg and rolled 6061 alloy (T6 state) was conducted by the tungsten inert-gas arc welding(TIG) method. The microstructure and mechanical properties of TIG welded joints under different...

A study on the microstructure, mechanical properties, and heat treatment process of pure tantalum TIG joints was conducted. Industrial computed tomography (CT), OM, and SEM were used to characterize the microstructure of...

Through the laser-wire coaxial additive manufacturing technology, laser melting deposition experiments of GH4169 superalloy under different offsets were carried out, and the effects of different offsets on the microstruc...

Abstract This study investigates the surface morphology, microhardness, and electrochemical corrosion behavior of Ti-Mn alloys reinforced with hydroxyapatite (HA) at 5, 10, and 15 wt% concentrations, fabricated via spark...

In this study, WTaNbMo refractory high-entropy alloy (RHEA) coatings were successfully fabricated on Inconel 718 substrate by laser cladding. Optimal coatings with superior comprehensive performances were systematically ...