Buscar recursos académicos

In this research the application of nanomaterials, nanocomposites reformed in semiconductor and chip sectors by fabricating them resulted in better performance compared to previous studies. These developed materials has ...

The effects of induced magnetic field, thermal and concentration convection on the peristaltic flow of Prandtl nanofluids are explored in this study in an inclined asymmetric channel. A detailed mathematical explanation ...

Abstract Alzheimer’s disease (AD) is a prevalent and progressive neurodegenerative disease characterized by behavioral abnormalities, memory loss, and cognitive decline, presenting significant challenges for early diag...

In this study, an all-optical multiplexer (Mux) based on elliptical insulator-metal-insulator (IMI) plasmonic waveguides is designed. The area of the proposed structure is very small (400 nm × 400 nm) which oper...

Nanotechnology is growing at an exponential rate and will undoubtedly have both beneficial and toxicological impact and consequences on health and environment. Amphibians are being increasingly used for toxicity screenin...

Materias / palabras clave: nanofabrication, nanostructure, nanomaterials, nanotechnology, nanoscience; Technology: Electrical engineering. Electronics. Nuclear engineering: Materials of engineering and construction. Mechanics of materials

Platinum nanoflowers (Pt NFs) composed of an ordered assembly of nanoparticles were synthesized by an ethanol reduction of [PtCl6]2– under a reflux condition (85 °C) at pH 2.5 in the presence of PVP (molecular weight ...

This paper presents a study of adsorption and vibrational features of folic acid, using surface-enhanced Raman scattering (SERS). A gold-capped silicon nanopillar (Au NP) with a height of 600 nm and a width of 120 nm was...

Murraya paniculata (MP) can be used as a reducing agent to produce silver nanoparticles (AgNPs) using a simple procedure. AgNPs are characterized in morphological and chemical properties, antioxidant activity, and cytoto...

In this chapter, we will focus on a specific X‐raybased technique among those employed in surface science and which is especially suitable for the study of self‐assembled nanocrystals: Grazing Incidence Small Angle X...

In the present work, the synergistic effect of multiwalled carbon nanotubes and glycidyl polyhedral oligomeric silsesquioxanes on the compression after impact behaviour of multifunctional carbon fibre–reinforced epoxy ...

Optical fiber gratings (OFGs), especially long-period gratings (LPGs) and etched or tilted fiber Bragg gratings (FBGs), are playing an increasing role in the chemical and biochemical sensing based on the measurement of a...

In this article, we report the measurement of underwater aerophobicity, through the captive-bubble method, for different polymeric coatings employed to protect microscale and nanoscale flexible electronic devices for sea...

Zinc Selenide Nanoparticles (NPs) were fabricated by the aqueous techneque using cold plasma under atmospheric pressure with an exposure time of 3 min and a gas flow rate of 3 liters per minute. films' structural charact...

"The adverse effects of engineered nanomaterials (ENMs) on bacterial populations found in wastewater treatment plants (WWTPs) or natural systems have been studied for more than a decade, but conflicting evidence on the m...

Heterogeneous photocatalysis using TiO2 is a non-selective technique used for the degradation of organic molecules. Controlling the morphology of TiO2 has recently been considered one of the important approaches for cont...

The catalytic conversion of palm oil was carried out over four zeolite catalysts—Y, ZSM-5, Y-ZSM-5 hybrid, and Y/ZSM-5 composite—to produce jet biofuel with high amount of alkanes and low amount of aromatic hydrocarb...

We investigated the effects of dopants on epitaxial growth of Si NWs, with an emphasis on synthesizing vertical epitaxial Si NW arrays on Si (111) substrates. We found that addition of boron with a B:Si feed-in atomic ra...

Abstract The present study was conducted to determine the impact of nanoparticles (TiO2 and ZnO) at concentrations (100,500,1000,5000) ppm and Bacillus thuringiensis spores at concentration (106 and109 cells/ml of D.W o...

The electrical properties of electrodeposited zinc‐copper‐telluride (ZnCuTe) nanowires embedded in polycarbonate track‐etch membrane (Whatman) having pore‐diameters of 200, 100 and 50nm have been studied and repo...

The main objective of this study is to investigate the electrical properties of Sn–3.0Ag–0.5Cu solder joint with the incorporation of carbon nanotube instead of solder bulk. Sn–3.0Ag–0.5Cu solder paste with the i...

Geopolymers are known for its high compressive but low tensile strength due to its brittle nature, which restricts the use of geopolymers as structural material. It is important to enhance their mechanical performance by...

In this study, we evaluated a nanoscale random rubbed structure (nRRS) used as a scattering layer in organic light-emitting diodes (OLEDs) through an innovative manufacturing method. The rubbing technique, which is conve...