Buscar recursos académicos

Materias / palabras clave: Materials handling; Materials science; Strains and stresses; Strength of materials; Ciencia de los materiales; Esfuerzos y deformaciones; Manejo de materiales; Resistencia de los materiales

Materias / palabras clave: Self-consolidating concrete; Strength of materials; Materials; Dynamic testing; Building materials; Hormigón autocompactable; Resistencia de materiales; Ensayo dinámico de materiales; Materiales de construcción

Materias / palabras clave: Resistencia de materiales; Ensayos; Strength of materials

Copper matrix composites face the inherent strength-conductivity trade-off, limiting their high-end applications. Inspired by bone and bamboo, a bioinspired oriented multicore composite (BOMC) was fabricated. Its dual-ne...

Background and Study Aim. Performing arts students, particularly musicians, face significant physical strain because of prolonged static postures and repetitive fine motor activity. These factors predispose them to perfo...

A dual-wire arc additive manufacturing (WAAM) strategy via in-situ alloying of AZ71 and Al-2Sc wires was proposed to fabricate a Mg-10.6Al-0.4Zn-0.2Mn-0.05Sc alloy, overcoming the limitation of wire fabrication and achie...

Different basic materials, such as K-L zeolite, K-Al2O3, K-Mg/Al mixed oxide and MgO, were used as supports of Pt-catalysts for the dry reforming of methane (DR) reaction. The effects of the distribution of basic strengt...

Glass ionomer cement as one of the restoration materials requires high compressive strength so it can last during functional activity. The latest glass ionomer cement comes with glass hybrid technology and a nanofilled r...

Transverse reinforcement with welded meshes is used in areas of significant compressive forces, usually in local places, where it is necessary to increase the strength of concrete in axial compression. In a calculated wa...

Abstract Utilization of industrial waste to produce geopolymer concrete is a good answer to minimize the carbon-dioxide( Co2) released from the traditional procedure of producing Ordinary Portland cement (OPC). This not ...

ABSTRACT This is the protocol for a Campbell systematic review. The objectives are as follows. The primary objective of this systematic review is to evaluate and synthesise both published and unpublished literature on th...

Sisal nanofiber can be used as an additional filler to increase the adhesion strength of the resin epoxy sealer. The aim of this study was to observe the effect of sisal nanofiber addition to epoxy resin sealer on push-o...

Carbon capture, utilization, and storage (CCUS) technology is an essential component of China's strategy to achieve carbon neutrality. It represents the necessary pathway for near-zero emissions from fossil fuels and pro...

Redox flow batteries, as a key long-duration energy storage technology underpinning new power systems, have become a strategic focus in global energy transition. Their industrialization process is highly dependent on per...

Immediate dentin sealing (IDS) is a technique involving the application of adhesive material to freshly prepared dentin for indirect restorations. This method prevents contamination by saliva, debris, and bacteria from p...

Glass fiber non-dental has a similar composition to E-glass fiber dental that commonly used as fiber reinforced composite (FRC) materials in resin bonded prosthesis. Fiber effectiveness can be determined by the length an...

Non-dental glass fiber is one of the materials that can be used to increase the impact strength of a acrylic resin base plate, containing a similar composition to that of dental e-glass fiber. Orientation and positions o...

Polymeric composites have been widely used in various structural and thermal aerospace applications. Polymeric composites having high strength and high modulus reinforcement are ideally suited for lot of critical aerospa...

Eight large-scale triaxial tests on coarse-grained soil with different lithologies are carried out. The effects of gradation on strength, deformation, dilatancy and particle breakage characteristics of coarse-grained soi...

Silicon energy is a new form of energy based on silicon materials and driven by semiconductor technology at its core. Silicon energy materials are strategic basic materials that support the green and low-carbon transform...

Aluminum (Al), a commonly used reactive metals, is widely applied in reactive material systems. However, its relatively low reactivity restricts the energy release of systems. To improve the reactivity of aluminum, we in...

The availability of dental E-glass fibers for Fiber Reinforcement (FRC) restoration is limited in Indonesia with relatively high cost.Therefore, non-dental glass fibers have been used as an alternative material. The comp...

Abstract Background This study aimed to evaluate the bond strength to dentin of dental posts fabricated with different PEEK using the push-out test, while also examining the failure modes. Methods Sixty mandibular premol...

Concrete's strength and deformability can be enhanced by adding external lateral confinement. Several materials and confinement techniques have been investigated throughout the development of confined concrete, including...