Buscar recursos académicos

Abstract This paper focused to enhance the mechanical and microstructural properties of Al 7475 alloy by incorporating Si₃N₄/TiO2 hybrid ceramic particles in developing composites through Friction Stir Welding (FSW...

Thermoset and fiber-reinforced composites (FRCs) are widely adopted for their exceptional mechanical strength, thermal resistance, and chemical stability that have demonstrated versatile applications across aerospace, au...

Abstract This study presents the development and characterization of epoxy-based composites reinforced with Aloe Vera powder and Flyash, advancing circular economy objectives through the valorization of bio-derived and i...

This research designs a sustainable composite material using PLA, palm biomass, and ground volcanic stone (VSMGP) to improve mechanical and insulation efficiency for green construction. The raw materials were dried , sie...

Abstract Engineered cementitious composites (ECC) are ductile cement-based materials developed to overcome the brittleness of conventional concrete by exhibiting strain-hardening behaviour and improved crack control unde...

Abstract This study presents the synthesis, characterization, and application of silanized nano-biochar (SNB) derived from palm kernel shell for the development of high-performance low-density polyethylene (LDPE) composi...

This review aims to critically investigate the swelling behavior of natural fiber-reinforced composites (NFRCs), with a focus on identifying key mechanisms of moisture absorption, the influence of fiber–matrix interact...

This paper reports the results of an experimental program on sustainable cementitious composites made with Recycled Brick Aggregates (RBAs) employed as carriers for Phase-Change Materials (PCMs). The PCM-RBAs were produc...

Abstract This study examines the thermo- and photo-oxidative degradation of bio-based polyamide 5.10, both neat and reinforced with 20 wt% regenerated cellulose fibers (RCF). The materials were additionally modified with...

Hybrid aluminum 6061 composites reinforced with various forms of magnesite-white (WM), dead-burnt magnesite (DBM), and lightly calcined magnesite (LCM)-in combination with carbon fiber (CF) were developed through the sti...

Fused deposition modeling is an additive manufacturing technique that enables complex structures to be fabricated layer by layer using thermoplastic filaments. The most common usage is based on the fact that polylactic a...

Additive manufacturing (AM) is a rapidly growing industrial fabrication technology. It provides engineers with a growing library of advanced materials, ranging from thermoplastics to metals and cement-based composites, e...

Conventional sulfur vulcanization in rubber manufacturing depends on elevated curing temperatures and zinc oxide activators, resulting in high energy consumption and increasing environmental concerns associated with zinc...

Radiative cooling is a passive cooling strategy that leverages thermal radiation to dissipate heat into a cooler environment, offering an energy-efficient and environmentally friendly alternative to conventional cooling ...

Abstract This study explores the valorization of ceramic waste (CW) and waste tire particles in the development of eco-friendly cementitious tiles for outdoor roof shielding applications. CW, sourced from industrial bypr...

Abstract Green composites are increasingly attracting interest due to their potential to address environmental issues by merging sustainable fillers with biodegradable polymers. The current study investigates the incorpo...

Abstract We report a scalable and sustainable method for synthesizing graphene oxide (GO) via a non-thermal atmospheric nano-second pulsed plasma (NSPP) process, using methane as the carbon source and water as the substr...

The widespread use of carbon fibre-reinforced polymer (CFRP) composites in sectors such as aerospace and aviation calls for the adoption of sustainable recycling protocols. This research evaluates the mechanical and tomo...

Abstract Composite overwrapped pressure vessels (COPVs) represent a paradigm shift in lightweight pressure containment, achieving substantial mass savings over traditional metallic vessels. However, their widespread depl...

ARTICLE HIGLIGHTS - Thailand bamboo showed higher density and strength for structural use - Yellow bamboo suited for composites, crafts, and fiber boards - Species, site, and culm height influence bamboo performance ABS...

Waste material, including glass, presents significant environmental challenges due to its non-biodegradable nature and low global recycling rates. Incorporating waste glass into concrete offers a sustainable solution, bu...

In order to explore how different mass ratio combinations of virgin high-density polyethylene (V-HDPE)/recycled high-density polyethylene (R-HDPE) affect fibre and print quality, this study conducts a series of analyses....