Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr

Artículo

Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr

S. Pukas et al · Vasyl Stefanyk Carpathian National University · 2020

Acceso abierto al texto completo

Lectura rápida. Revisá los datos básicos del recurso y luego accedé al contenido desde el botón principal. En esta ficha solo se muestra la información necesaria para identificar la obra, citarla y abrirla.

Autor / responsable

S. Pukas et al

Editorial

Vasyl Stefanyk Carpathian National University

Año

2020

ISSN

1729-4428

ISSN

1729-4428

Idioma

eng

Acceso al recurso

Entrá al contenido desde la opción principal o elegí otra fuente disponible.

Acceso principal

Acceso abierto al texto completo

Texto completo identificado como acceso abierto.

Abrir texto

Resumen

Descripción general del contenido del recurso.

The effect of the WC content and the sintering temperature, as the main technological factor, on the phase composition of TiC–xWC–5VC–18NiCr alloys was investigated by X-ray phase analysis. It was established that the main phases in the investigated alloys were the NaCl-type quaternary (Ti,V,W)C phase and a solid solution of Cr in Ni. Depending on the size of the WC particles used for the preparation, the metal binder could be described by the formula Ni0.75Cr0.25 (for nano WC) or Ni0.5Cr0.5 (for fine-sized WC). In alloys prepared with fine-sized WC, elementary Cr and traces of the Cr3C2 and Cr23C6 were also found. With increasing content of nano-sized WC and sintering temperature the solubility of W in (Ti,V)C increased. No W2C phase was detected under the conditions of the investigation.

Cómo citar

Elegí el formato que necesitás y copiá la referencia al portapapeles.

APA 7

al, S. P. E. (2020). Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr. https://doi.org/10.15330/pcss.21.3.496-502

MLA

al, S. Pukas et. "Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr." 2020. https://doi.org/10.15330/pcss.21.3.496-502.

Chicago

al, S. Pukas et. 2020. "Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr.". https://doi.org/10.15330/pcss.21.3.496-502.

Harvard

al, S. P. E. 2020, Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr, Vasyl Stefanyk Carpathian National University, available at: https://doi.org/10.15330/pcss.21.3.496-502 [Accessed 29 Jun. 2026].

Compartir e imprimir

Guardá la ficha, copiá su enlace permanente o imprimila como PDF.

Exportar referencia

Si usás un gestor bibliográfico, podés exportar el registro en los formatos más comunes.

RIS BibTeX

Detalles del recurso

Información bibliográfica útil para confirmar que se trata del material correcto.

Título: Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr

Autor / colaboradores: S. Pukas et al

Editorial: Vasyl Stefanyk Carpathian National University

Año de publicación: 2020

ISSN: 1729-4428

ISSN: 1729-4428

Idioma: eng

Materias

Explorá otros recursos relacionados a partir de estas materias.

hard alloy; nano wc; fine-sized wc; x-ray powder diffraction; phase composition