Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques

Artículo

Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques

Euclides L. Chuma et al · Sociedade Brasileira de Microondas e Optoeletrônica e Sociedade Brasileira de Eletromagnetismo

Accesso aperto disponibile

Lettura rapida. Controlla i dati essenziali della risorsa e accedi al contenuto con il pulsante principale. La scheda mostra solo le informazioni necessarie per identificare, citare e aprire l’opera.

Autore / responsabile

Euclides L. Chuma et al

Editore

Sociedade Brasileira de Microondas e Optoeletrônica e Sociedade Brasileira de Eletromagnetismo

ISSN

2179-1074

ISSN

2179-1074

Lingua

Inglés

Accesso alla risorsa

Apri il contenuto dall’opzione principale o scegli un’altra fonte disponibile.

DOAJ DOAJ Articles

Entrar por DOAJ

Accesso principale

Accesso aperto disponibile

Recurso identificado como acceso abierto, sin confirmar automáticamente si es texto completo directo.

Apri risorsa

Riepilogo

Descripción general del contenido del recurso.

Abstract In this study are analyzed horn antennas to operating at X band (8 – 12 GHz) and manufactured by additive manufacturing method (AM). To construct the antennas using AM method was necessary made the structure with acrylonitrile butadiene styrene (ABS) thermoplastic using a 3D printer, and then coated the antennas with conductive surfaces. Were fabricated three antennas with different coated techniques: the first antenna with conductive silver paint, the second antenna using copper tape and the third antenna using copper plated. It is investigated the performances of these antennas in terms of the input reflection coefficient, gain, radiation pattern, weight and compared with the conventional aluminum horn antenna with same dimensions.

Come citare

Elegí el formato que necesitás y copiá la referencia al portapapeles.

APA 7

al, E. L. C. E. (s. f.). Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques. https://doi.org/10.1590/2179-10742019v18i21337

MLA

al, Euclides L. Chuma et. "Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques.". https://doi.org/10.1590/2179-10742019v18i21337.

Chicago

al, Euclides L. Chuma et. s. f. "Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques.". https://doi.org/10.1590/2179-10742019v18i21337.

Harvard

al, E. L. C. E. s. f, Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques, Sociedade Brasileira de Microondas e Optoeletrônica e Sociedade Brasileira de Eletromagnetismo, available at: https://doi.org/10.1590/2179-10742019v18i21337 [Accessed 8 Aug. 2026].

Condividi e stampa

Salva la scheda, copia il link permanente o stampala in PDF.

Esporta riferimento

Esporta il record nei formati più comuni per usarlo con un gestore bibliografico.

RIS BibTeX

Dettagli della risorsa

Informazioni bibliografiche utili per verificare che sia il materiale corretto.

Titolo: Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques

Autore / collaboratori: Euclides L. Chuma et al

Editore: Sociedade Brasileira de Microondas e Optoeletrônica e Sociedade Brasileira de Eletromagnetismo

ISSN: 2179-1074

ISSN: 2179-1074

Lingua: Inglés

Soggetti

Esplora risorse correlate a partire da questi soggetti.

antenna; 3D printing; additive manufacturing; horn; coated