Buscar recursos académicos

Standby techniques are widely employed in power systems to enhance safety and reliability, and are typically classified as hot, warm, or cold. Recent work has emphasized warm standby because it combines key advantages of...

The focus of this research is optimizing a wind power plant using a Permanent Magnet Synchronous Generator (PMSG). The backpropagation method of the artificial neural network system was chosen to optimize the output powe...

The main objectives of this study are to enhance the power extraction of photovoltaic (PV) systems under rapidly changing ecological circumstances using Maximum Power Point Tracking (MPPT) and to improve the power qualit...

Due to the issues of low throughput and low time synchronization accuracy when traditional power timing terminals transmit communication data, a power timing terminal for novel power system communication network security...

Aiming at the power flow tracking performance optimization problem of modular multilevel converter (MMC)-unified power flow converter (UPFC) in novel power system, a Lyapunov nonlinear control strategy of MMC-UPFC under ...

The construction of novel power system puts forward higher requirements for resource response of power demand side in China. As the main user of power demand side in China, industrial load accounts for a high proportion ...

The proposal of the carbon peaking and carbon neutrality target has promoted the transition of power dispatching to low-carbon. In response to the problem that existing multi energy power dispatching methods are difficul...

Abstract Nowadays, communication and networking technologies are essential for Oil & Gas industries in order to guarantee reliability, safety and low costs in the producing process. Information access and commands and se...

The main objectives of the study are to develop a generalized thermo-electromechanical model of a solid-state heat engine based on a Ni-Ti-Cu shape memory alloy for converting low-grade thermal energy (30-100 °C) into e...

Introduction. Three-phase pulse width modulation (PWM) rectifiers are widely used in modern power conversion systems due to their high efficiency, controllability, and ability to provide high-quality energy conversion. T...

The purpose of this study is to justify the design parameters of spiral-vortex equipment ensuring energy-efficient desulfurization of flue gases from autonomous medium-capacity gas-piston power plants (GPPPs). The study ...

Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonl...

This article presents operational data from turboexpander units (TEU) wherein a stable temperature gradient across both the turboexpander and the turbocompressor coexists with its power imbalance. A hypothesis attributin...

This paper presents a theoretical and experimental comparison of two techniques of optical fiber current sensors (OFCS) based on the Faraday Effect: the power and the degree of polarization (DOP) methods. The DOP method ...

A magnetic levitation control system is developed in this work. The non-linear system model is linearized around the operating point. Two control loops, an inner current loop and an outer position loop are designed using...

Electrochemical migration (ECM) is a major concern in modern electronics because miniaturization has reduced insulation distances and electronics are now operated in harsher environments than before. Previous studies on ...

Solar panels consist of photovoltaic cells which are identical to diode semiconductor devices. Photovoltaics have a special point which is usually called MPP (Maximum Power Point). At that point, the photovoltaic is in a...

This study investigates the long-term aging effects and structural degradation mechanisms of photovoltaic (PV) modules integrated into smart city furniture, with a particular focus on panels of 10 W, 25 W, and 40 W nomin...

Introduction. Stator flow-oriented control is currently the most widely used system in industry or in previous research for improving the quality of mechanical power generated by permanent magnet synchronous motors (PMSM...

This paper proposes a high-frequency wireless power transfer (WPT) system. This system achieves zero-voltage switching (ZVS) and the constant current (CC) and constant voltage (CV) outputs regardless of load variations a...

This article presents the design and simulation-based evaluation of a 225 kW grid-interactive bidirectional fast DC charger for electric vehicles operating in both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) modes. T...

Penelitian ini bertujuan untuk mengetahui potensi energi angin di Kabupaten Pangkep, kapasitas daya yang mampu tenaga angin, simulasi logika Fuzzy sistem hibrida dalam melayani beban, dan mengetahui sistem operasi ekonom...

Source-grid-load-storage coordinated operation control is an operation mode and technology that can maximize the utilization of energy resources, and can economically, efficiently and securely improve the power dynamic b...

We present a vectorial optical field (VOF) framework that surpasses the diffraction limit in both long-range imaging and energy delivery. By jointly engineering spatial and temporal dimensions, reflective Fourier ptychog...