Buscar recursos académicos

This study investigates the properties of a composite material obtained by mixing Fe78Si9B13 metallic powders (at %) with graphene nanoplates (GNP) in an epoxy matrix. Four composite types were created with GNP weight pr...

Two-dimensional layered semiconductors have attracted intense interest in recent years. The van der Waals coupling between the layers tolerates stacking various materials and establishing heterostructures with new charac...

Abstract A dual chamber microbial fuel cells was developed using biomass derived reduced graphene oxide (E-rGO) synthesized from Ensete ventricosum corm waste as an anode material for simultaneous bioelectricity generati...

Frame Partial Denture as a Supportive Therapy for Periodontal Health. Partial denture is very important in maintaining periodontal health and maintaining the stability of the remaining teeth. The fabrication of denture i...

The discovery of graphene, the first two-dimensional (2D) material, has caused an upsurge, as this kind of material revealed a tremendous potential of application in areas such as energy storage, electronics, and gas sep...

Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combi...

Nonlinear optics, when combined with microscopy, is known to provide advantages including novel contrast, deep tissue observation, and minimal invasiveness. In addition, special nonlinearities, such as switch on/off and ...

Electroslag welding involves high heat input, which may cause material hardening in the weld and heat-affected zone. At the same time, the electroslag weld is in an inaccessible state, making the welding quality difficul...

The global transition to sustainable energy systems requires breakthroughs in electrochemical storage technologies that are not only safe but also resource efficient. Solid-state batteries (SSBs), which use superionic so...

Single-atom catalysts (SACs) and dual-atom catalysts (DACs) have emerged as promising materials for activating persulfate (PS) in advanced oxidation processes (AOPs) aimed at degrading organic pollutants. This review sys...

Abstract This study explores the valorization of ceramic waste (CW) and waste tire particles in the development of eco-friendly cementitious tiles for outdoor roof shielding applications. CW, sourced from industrial bypr...

Abstract Confinement epitaxy beneath graphene stabilizes exotic material phases by restricting vertical growth and altering lateral diffusion, conditions unattainable on bare substrates. However, achieving long-range int...

We report the design of a high-throughput gradient hyperbolic lenslet built with real-life materials and capable of focusing a beam into a deep sub-wavelength spot of λ/23. This efficient design is achieved through high...

One of the current issues at the basis of the understanding of novel materials is the degree of the role played by spatial inhomogeneities due to subtle phase separations. To clarify this picture here we compare the plai...

The materials for medical application are normally consisted of metal, ceramic, and polymer. Each material has its own limitations such as corrosion in metal, the brittleness of ceramic, and the high temperature problem ...

One of the main figures of merit in laser-ablative propulsion is the specific impulse, Isp, defined as the impulse per unit weight of fuel, and it is related to the exhaust velocity, ve, by the acceleration of gravity, I...

In this research , microwave ray absorbing coating materials had been prepared which work within ( X - band ) frequency i.e 3 cm wavelength . The coating materials were prepared from a mixture of pigmented materials such...

Latar belakang. Bahan yang dipakai untuk pembuatan Gigi Tiruan Sebagian (GTS), antara lain: resin akrilik, kerangka logam, kombinasi kerangka logam dengan resin akrilik. Resin akrilik adalah bahan plat gigi tiruan yang m...

Additive manufacturing (AM) is a rapidly growing industrial fabrication technology. It provides engineers with a growing library of advanced materials, ranging from thermoplastics to metals and cement-based composites, e...

Bismuthoxide-based catalysts gained attention for photocatalytic remediation of environmental pollutants owing to their low cost, feasibility, stability, small, and tunable band gap. In the present work, bismuth molybdat...

There is a limited number of metal alloys and metal-ceramic powders available for use in additive manufacturing (AM) processes. There is great demand to develop industrial-scale processes for producing raw material with ...

Abstract The current study employs Bayesian-regularization optimizer technique with artificial neural networks (BROT-ANNs) to investigate the significance of local thermal non-equilibrium influences on wax + sand-bas...

Laminate composites offer an effective strategy to overcome strength-ductility trade-off by harnessing the synergistic properties of constituent metals. In the TA1/304 steel composite, a unique nano-scale heterostructure...

Silver colloid based nanostructures are a very common means of achieving strong SERS signals. This is due to the hot spots that are formed in between the nanoparti‐ cles, as well as their ease of synthesis. They are fr...