Buscar recursos académicos

An iterative refining method using FullProf software (Rietveld refinement) as a multi-input–output black-box with cyclic feedback is proposed in order to accurately measure the lattice misfit in two-phase coherent allo...

In this work, the amorphous alloys Co₆₉Nb₂₃B₈, Fe₇₈Si₉B₁₃, Co₆₈Cu₂₃B₉, and Fe₆₄Nb₂₈B₈ were synthesized by high-energy mechanical milling (HEM) and investigated as promising biomate...

Cobalt chromium (CoCr) alloys are utilized to make dental prosthesis. Casting CoCr alloys is a common operation in dentistry laboratories due to its low cost. Casting surplus (metal remaining in the sprue and crucible fo...

The specific features of using chalcogenide alloys of the nonstoichiometric ternary system (As2S3)x(Ge2S3)1-x in dosimetry of high-energy γ-radiation are analyzed. It is shown that when developing dosimetric systems bas...

High‐entropy alloys (HEAs) are emerging as promising candidates for advanced electrocatalysis due to their multi‐elemental compositions, tunable electronic structures, and remarkable stability. Recent advances in syn...

Cu-Ni nano-alloys were prepared using precursors synthesized by the citrate-gel method. The effects of initial solution pH value and calcination temperature on the composition, crystalline structure, purity, morphology, ...

A review of the regularities of the influence of interstitial elements (oxygen, nitrogen) on the properties of zirconium alloys was presented. It was noted that in the scientific and technical literature dates the main a...

Abstract The design of multi-principal element alloys (MPEAs) is challenged by data scarcity and the complexity of optimizing multiple mechanical properties simultaneously. To address these challenges, we investigate an ...

The transformations during continuous cooling and their effect on the thermoelastic behaviour of β-CuAlBe shape memory alloys have been studied by electrical resistometry, microscopy and differential calorimetry. Under ...

As a novel reactive damage material, high-entropy alloys (HEAs) have garnered widespread attention in the field of reactive damage in recent years due to their excellent mechanical properties and favorable energy release...

Superelasticity is a characteristic thermomechanical property in shape memory alloys (SMA), which is due to a reversible stress-induced martensitic transformation. Nano-compression experiments made possible the study of ...

Abstract In recent years, additive manufacturing (AM) has gained popularity in the aerospace, automobile, and medical industries due to its ability to produce complex profiles with minimal tolerances. Micro-milling is re...

Abstract The development of battery electric vehicles (BEVs) is actively progressing; however, increasing battery capacity remains difficult, and the required driving range has not been achieved. Consequently, methods to...

Abstract Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry. To study the mechanical behavior of a typical ductile cast iron (GJS-450) with nodular g...

The aluminum alloys D16 and AMg6 were irradiated using the high-current relativistic electron beam in vacuum. Intense electron irradiation of the materials modified their physical properties. The fractal character of the...

While heterostructured materials leveraging both continuous and discontinuous precipitation have been developed to enhance the mechanical properties of L12-strengthened high-entropy alloys, the pivotal role of the hard-t...

The mechanical alloys-composite MАs (Mg +10 % wt.Ti + 5 % wt.Y and Mg +10 % wt.Ni + 5 % wt.Y) were synthesized. The phase content, microstructure, the thermal stability, kinetics of hydrogen desorption from the MgH2 hyd...

The shape memory effect in Cu–Al–Ni alloys iscaused by martensitic transformations between a metastablematrix (β phase) and one or more martensitic phases. Inthese alloys, when diffusion becomes significant, precipi...

The effect of the WC content and the sintering temperature, as the main technological factor, on the phase composition of TiC–xWC–5VC–18NiCr alloys was investigated by X-ray phase analysis. It was established that ...

The ferromagnetic amorphous phase in rapidly solidified Nd60Fe30Al10 glass forming alloys is investigated in melt spun ribbons (100 µm thick) and in chill cast cylinders (2 mm diameter). The amorphous resulting for thes...

In this work the structure and corrosion behavior of quasicrystalline cast Al63Cu25Fe12 and Al63Co24Cu13 alloys in 5-% sodium chloride solution (рН 6.9–7.1) were investigated. The alloys were cooled at 5 К/s. The st...

A dual-wire arc additive manufacturing (WAAM) strategy via in-situ alloying of AZ71 and Al-2Sc wires was proposed to fabricate a Mg-10.6Al-0.4Zn-0.2Mn-0.05Sc alloy, overcoming the limitation of wire fabrication and achie...

The formation of quasicrystalline decagonal phase and related crystalline phases was investigated by a combination of optical metallography, powder X-ray diffraction, atomic absorption spectroscopy and differential therm...

The structural and phase composition of boron-rich Fe–В–С alloys in the concentration range of 9.0–16.0 % В, 0.001–1.7 % С, Fe – the balance (in wt. %) was investigated in this work. The cooling rate of the...