Buscar recursos académicos

Integrated photonics based on silicon has drawn a lot of interests, since it is able to provide compact solution for functional devices, and its fabrication process is compatible with the mature complementary metal-oxide...

In this review, the relation of aluminium toxicity with human health is evaluated from the point of view of quality control. The main sources for aluminium entering the human body are cited and the aluminium limits for t...

İn this review, the relation of aluminium toxicity with human health is evaluated from the point of view of quality control. The main sources for aluminium entering the human body are cited and the aluminium limits for ...

Stable and adherent polypyrrole films have been successfully electrodeposited onto aluminium electrode over a wide solution pH interval by using sodium bis(2-ethylhexyl) sulfosuccinate as dopant. The redox behaviour of t...

Aluminium is universal and vital constituent in composite propellants and typically used to improve performance. Aluminum agglomeration takes place on the burning surface of aluminized propellants, which leads to reduced...

Combustion of aluminized solid propellants exhibits phenomena associated with accumulation, agglomeration, ignition, and combustion of ultra-fine aluminium particles. In this study, agglomeration phenomenon of ultra-fine...

There is a limited number of metal alloys and metal-ceramic powders available for use in additive manufacturing (AM) processes. There is great demand to develop industrial-scale processes for producing raw material with ...

Abstract Accurate quantification of external force is the key to improve the high-precision hemming of autobody closure panels. However, the mechanism of external force on forming quality of complex contour sheet metal w...

Quasicrystalline aluminium alloys and aluminium based nanocomposites with the advantage of high strength over commercial aluminium alloys have been studied for many years. In this work a nanoquasicrystalline Al-Fe-Cr-Ti ...

Abstract In this study, aluminium (Al) matrix composites reinforced with 0, 5, and 10 vol% silicon carbide (SiC) particles were fabricated by direct hot-pressing under 35 MPa pressure at 600 °C for a holding time of 5...

The LC10, 50 and 90/24 h of aluminum for Rhinella arenarum embryos at complete operculum stage were 0.55, 0.75 and 1 mgAl3+/L respectively. Those values did not change significantly by expanding the exposure period till ...

The present study focused on the evaluation of critical influencing parameters of the FSW of AA6061-T6 and AA2024-T351 alloys. The materials properties of AA6061-T6 are heat-treatable alloys possessing properties of good...

Materias / palabras clave: va-ecmo; point of care ultrasound (pocus); aluminium phosphide

Thirty two samples of natural honey produced in the province of La Pampa (Argentina) were characterised on the basis of their phosphorous, aluminium, iron, calcium, magnesium and sodium contents. Analytical determination...

IntroductionEffective cation exchange capacity (ECEC) is a key indicator of soil fertility and sustainable soil management assessment in coffee-growing systems.MethodsThis study aimed to identify the principal edaphic an...

Abstract The influence of three cooking methods (stewing, microwaving and Aluminium (Al) foil-baking) was evaluated on the content of intramuscular lipid and the composition of intramuscular fatty acids of Hyla rabbit. T...

Abstract Friction Stir Welding (FSW) is a reliable solid-state joining technique for aluminium alloys, where conventional fusion welding often causes porosity, solidification cracking, and excessive heat-affected softeni...

Background/Aim: The role of ions in prevention of dental caries has been demonstrated in numerous studies. The aim of this study was to investigate the amount of released ions from different restorative materials using i...

Abstract Single Point Incremental Forming (SPIF) offers high flexibility for producing complex sheet metal components. However, simultaneous high formability and high surface integrity remain problematic with aluminium a...

The main purpose of this work was to show that by using low‐pressure plasma it is possible to obtain platinum nanoparticles with uniform size and shape and then apply these nanoparticles in order to evaluate the proces...

Abstract Lithium metal batteries possess the high theoretical specific energy owing to the high theoretical specific capacity of lithium metal. However, practical implementations necessitate a reduction in both lithium m...

Bobbin tool friction stir welding (BT-FSW) is a solid-state joining technique that produces high-strength welds without the need for backing plates. This study introduces a new variant, termed hybrid bobbin tool friction...

Waste thin plastic wrap in the form of crackle plastic, aluminium coated plastic, other thin plastics, have not yet been widely utilized. Limited un-organic rubish collector willing to receive it. The price is also relat...

Space debris will become a more prevalent issue in this decade as technological advancements and greater dependencies on communications require more satellites in orbit, with some companies already hosting mega-constella...