Buscar recursos académicos

Abstract Solar cells integrated with antennas have aroused scientific interest as an attractive energy source alternative in low power devices for IoT and Wireless Sensor Network applications. Since the space for all com...

AbstractA compact (20 x 20 mm2 size), coplanar waveguide (CPW) fed, octagonal slotted, dual-band antenna is presented in this paper. The proposed antenna has a simple structure consisting of an octagonal slot, L-shape st...

Abstract A Defected Ground Structure, DGS, based on matryoshka geometry is described in this paper. The proposed DGS geometry is outlined and initial design equations are presented. Four prototypes, with resonant frequen...

Abstract This article presents the analysis of a hybrid, error correction-based, neural network model to predict the path loss for suburban areas at 800 MHz and 2600 MHz, obtained by combining empirical propagation model...

Abstract An attempt has been made to present a new device which will function as a highly efficient SDR (Single Drift Region) P+-N- N+ IMPATT diode utilizing the advantages of a junctionless field effect transistor. The ...

Abstract Radio-Frequency Identification (RFID) is one of the leading enabling technologies of the Internet of Things (IoT) at low cost and high granularity scenarios. The cost of implementing IoT applications concerns th...

Abstract This paper presents a radiopropagation algorithm based on a Ray Tracing (RT) technique that combines a modified multipath model for constant refractivity gradient profiles and the Uniform Theory of Diffraction (...

Abstract The growing demand for multiparameter sensors includes compact devices accompanied by simple calibration processes to distinguish the outputs from each other. This paper evaluates a scheme to determine multiple ...

Abstract This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and o...

Abstract Recently research show that some parameters such as the shapes of antenna patch and the ground plane when geometrically altered produces changes in the current density distribution of the planar structure and co...

Abstract In this paper, a new multiband fractal frequency selective surface (MF-FSS) is proposed. The work presents a new fractal design methodology for FSSs with Swastika fractal patch elements. The proposed MF-FSS incl...

Abstract In this paper a 2-4 GHz microstrip IFM (Instantaneous Frequency Measurement) subsystem that uses Wilkinson power dividers, frequency discriminators based on band-stop filters and a DC arduino section is reported...

Abstract This work presents the design of a tri-bandpass filter based on the side-coupled square ring structure. The modeling is conceived from the classic approach of coupled transmission lines. The geometry consists of...

Abstract In this work a broadband Magnetoelectric (ME) dipole antenna for the Global Navigation Satellite System (GNSS) applied to nanosatellites is proposed. The antenna consists of a reflective cavity with open walls c...

Abstract This paper originates from a practical experiment based on Mesh Networks. The promising results obtained from this experiment prompted us to discuss in greater depth whether Wireless Local Area Networks (WLAN) a...

Abstract Ground Penetrating Radar is a complex nondestructive evaluation technique where the antenna is the most critical part. The antenna is responsible for transmission and reception of waves at the proper level and f...

Abstract In this article, a small Quad-Band microstrip patch antenna with folded strip lines for WiMAX/WLAN and ITU Applications is presented. This antenna consists eight symmetrical rectangular folded strip lines with 2...

A comparative analysis of two cylindrical complex-frequency-shifted perfectly matched layers (CFS-PML) absorbing boundary condition (ABC) for bi-dimensional (2-D) finite-volume (FV) simulations in the frequency domain is...

In this paper a three layer FSS is described which provides a ultrawide band (UWB) response. The layers use plain rectangular patches, and rectangular patches with one or two notches which provide multi-band responses; b...

This paper presents an evaluation of the phase shifting excitation and load effects in a Transmission Line Exciting Chamber. This chamber is suggested as an alternative for immunity tests because of the restrictions rela...

Abstract This paper presents a novel design of an X-band (812 GHz) 4-bit monolithic microwave integrated circuit (MMIC) type true-time-delay (TTD) line for wideband high-resolution imaging radar applications. The designe...

Abstract This paper presents a reflectarray antenna with an innovative dielectric mirror in the form of a discretized concave reflector. The mirror, manufactured via 3D printing, combines dielectric and air layers, formi...

A novel transformation of band pass- to low pass filter is introduced in this paper. First a compact microstrip band pass filter designed, optimized and realized by combining a simple multilayer method with magnetically ...

This work studies a Transcutaneous Energy Transmitter (TET) which uses electromagnetic fields to transfer power from outside the body to an artificial organ in the body, working like a high frequency transformer with the...