Buscar recursos académicos

Abstract The signal digitization process of the open television system is still in progress, therefore, the study of the digital signal propagation has great importance so that broadcasters can develop and improve the tr...

Abstract Microstrip filters are widely employed in radio fre-quency and microwave circuits due to their efficiency, easy fabri-cation, and compatibility with printed circuit board technologies. In this scenario, this wor...

Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonl...

A comparative analysis of two cylindrical complex-frequency-shifted perfectly matched layers (CFS-PML) absorbing boundary condition (ABC) for bi-dimensional (2-D) finite-volume (FV) simulations in the frequency domain is...

This paper presents an evaluation of the phase shifting excitation and load effects in a Transmission Line Exciting Chamber. This chamber is suggested as an alternative for immunity tests because of the restrictions rela...

Abstract The single phase equivalent circuit is largely used to model the three-phase induction motors in steady-state operation and under sinusoidal balanced voltages. Depending on the desired application, the circuit m...

Abstract This paper proposes an optimal design for a surface mounted permanent magnet synchronous machine (SM-PMSM) based on parametric optimization process to reduce the on-load Back-EMF distortions caused by an increas...

Optimization of design parameters based on electromagnetic simulation of microwave circuits is a timeconsuming and iterative procedure. To provide a fast and accurate frequency response for a given case study, this paper...

Abstract In this paper, a finite-difference time-domain (FDTD) formulation, based on the exponential matrix and on thin material sheet methods is developed for modeling subcellular thin graphene sheets. This formulation ...

In this paper, a semi-empirical method for the prediction of rain attenuation in slant paths and terrestrial links is proposed. The method uses the same simplified model of equivalent rain cell that is the basis for the ...

Abstract Solar cells integrated with antennas have aroused scientific interest as an attractive energy source alternative in low power devices for IoT and Wireless Sensor Network applications. Since the space for all com...

AbstractA compact (20 x 20 mm2 size), coplanar waveguide (CPW) fed, octagonal slotted, dual-band antenna is presented in this paper. The proposed antenna has a simple structure consisting of an octagonal slot, L-shape st...

Abstract A Defected Ground Structure, DGS, based on matryoshka geometry is described in this paper. The proposed DGS geometry is outlined and initial design equations are presented. Four prototypes, with resonant frequen...

Abstract This article presents the analysis of a hybrid, error correction-based, neural network model to predict the path loss for suburban areas at 800 MHz and 2600 MHz, obtained by combining empirical propagation model...

Abstract An attempt has been made to present a new device which will function as a highly efficient SDR (Single Drift Region) P+-N- N+ IMPATT diode utilizing the advantages of a junctionless field effect transistor. The ...

Abstract Radio-Frequency Identification (RFID) is one of the leading enabling technologies of the Internet of Things (IoT) at low cost and high granularity scenarios. The cost of implementing IoT applications concerns th...

Abstract This paper presents a radiopropagation algorithm based on a Ray Tracing (RT) technique that combines a modified multipath model for constant refractivity gradient profiles and the Uniform Theory of Diffraction (...

Abstract The growing demand for multiparameter sensors includes compact devices accompanied by simple calibration processes to distinguish the outputs from each other. This paper evaluates a scheme to determine multiple ...

Abstract This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and o...

Abstract Recently research show that some parameters such as the shapes of antenna patch and the ground plane when geometrically altered produces changes in the current density distribution of the planar structure and co...

Abstract In this paper, a new multiband fractal frequency selective surface (MF-FSS) is proposed. The work presents a new fractal design methodology for FSSs with Swastika fractal patch elements. The proposed MF-FSS incl...

Abstract In this paper a 2-4 GHz microstrip IFM (Instantaneous Frequency Measurement) subsystem that uses Wilkinson power dividers, frequency discriminators based on band-stop filters and a DC arduino section is reported...

Abstract This work presents the design of a tri-bandpass filter based on the side-coupled square ring structure. The modeling is conceived from the classic approach of coupled transmission lines. The geometry consists of...

Abstract In this work a broadband Magnetoelectric (ME) dipole antenna for the Global Navigation Satellite System (GNSS) applied to nanosatellites is proposed. The antenna consists of a reflective cavity with open walls c...