Buscar recursos académicos

Nickel-titanium (NiTi) arch wire has properties that favor its use during the leveling and aligning phase of orthodontic treatment. This NiTi orthodontic arch wire has the potential to experience nickel ion release. One ...

To meet the requirements of precision and high-performance diffusion bonding for titanium alloy structures, pure graphite was used as the position limitation block. Diffusion bonding tests of TA15 titanium alloy samples ...

Denture base material should have a good level of biocompatibility. Acrylic resin is frequently used as a denture base material, however it has a disadvantage of producing residual monomer. Residual monomer is known to h...

Abstract In recent years, additive manufacturing (AM) has gained popularity in the aerospace, automobile, and medical industries due to its ability to produce complex profiles with minimal tolerances. Micro-milling is re...

The fields of biotechnology, pharmacy, agriculture, and health could all benefit greatly from advances in Nano science and nanotechnology. The synthesis, characterizations, and antibacterial qualities of titanium dioxide...

Abstract As an important green manufacturing process, dry grinding has problems such as high grinding temperature and insufficient cooling capacity. Aiming at the problems of sticking and burns in dry grinding of titaniu...

The surface roughness of an implant material (titanium alloy) is an important factor in optimizing osseointegration. Various efforts have been made to optimize the roughness of implant materials, such as acid etching. Pr...

Abstract Tool wear is a critical challenge in titanium alloy friction stir welding (FSW). Vortex flow-based FSW (VFSW) is a potential solution for this issue because the VFSW process uses a similar material to the base m...

The morphology of titanium, zirconium, and hafnium nanofilms deposited onto zirconia after annealing in vacuum at 1400, 1500, and 1600°C was studied. Nanofilms show a tendency to fragmentation; for titanium it begins at...

Titanium is a gold standard material in dental implant treatment due to its biocompatibility and excellent mechanical strength. However, titanium has no bioactivity and osteoconductivity. This has led to studies to devel...

Abstract Titanium and its alloys have been widely applied in many biomedical fields because of its excellent mechanical properties, corrosion resistance and good biocompatibility. However, problems such as rejection, she...

Soft liners are recommended in denture stomatitis, yet they are prone to microorganism colonization. Modification of soft liners can be done by adding titanium dioxide (TiO2) because they induce photocatalytic production...

Abstract Ultrasonic welding is an effective ways to achieve a non-reactive/immiscible heterogeneous metal connection, such as the connection of magnesium alloy and titanium alloy. But the thermal mechanism of magnesium a...

In narrow-gap laser–arc hybrid welding, the droplet transfer behavior indirectly affects the formation of porosity defects by influencing the molten pool disturbance and keyhole stability. To reveal the correspondence ...

Ti-6Al-4V alloy with TiO2 coating is the most commonly selected material to construct an aortic heart valve. Wear resistance is the main mechanical property to be evaluated for this purpose. In this paper, the wear resis...

Abstract The current research of titanium alloy on friction welding process in the field of aero-engines mainly focuses on the linear friction welding. Compared to the linear friction welding, inertial friction welding o...

Abstract This study aimed to evaluate the mechanical performance of CF/PEEK composite plates for external fixation through finite element analysis (FEA), and to explore the impact of different screw placement patterns on...

To improve the photocatalytic property of titanium dioxide, titanous sulfate as the titanium source, cobalt nitrate hexahydrate as the cobalt source, undoped and Co 2+ -doped titania nanotubes were prepared via coprecipi...

The design of sulfur hosts with polar, sulfurphilic, and conductive network is critical to lithium-sulfur (Li-S) batteries whose potential applications are greatly limited by the lithium polysulfide shuttle effect. Mxene...

The results are presented of the study of kinetics of fragmentation of titanium nanofilms 100 nm thick deposited onto the surface of samples made from single crystals of Al2O3(leucosapphire), ZrO2, SiC, and AlN ceramics ...

In most perovskite nanocrystal (PeNC)-based optoelectronic and photonic applications, surface ligands inevitably lead to a donor–bridge–acceptor charge transfer configuration. In this article, we demonstrate success...

In the present work a numerical model is constructed for the joint optimization of experimental data on recoilless fraction, using an improved relation between Debye temperature and the volume dependence of Griineisen pa...

Abstract Background Various designs of dental implants made of zirconium dioxide (zirconia) as an alternative to titanium implants are available as one-piece implant (OPI) or as bone-level or tissue-level two-piece impla...

This present study was carried out to synthesize cobalt-doped and undoped titanium dioxide nanosized particles using sonochemical hydrolysis technique. The microstructure and morphological characteristics of the synthesi...