Buscar recursos académicos

For the first time, the effect of B2O3 additive on the IR transmission spectra of ZrF4 and HfF4 samples and the optical properties of the coatings obtained from them was investigated. A significant difference in the shap...

A review of the regularities of the influence of interstitial elements (oxygen, nitrogen) on the properties of zirconium alloys was presented. It was noted that in the scientific and technical literature dates the main a...

The morphology of titanium, zirconium, and hafnium nanofilms deposited onto zirconia after annealing in vacuum at 1400, 1500, and 1600°C was studied. Nanofilms show a tendency to fragmentation; for titanium it begins at...

In this study, the characteristics of phonon transport in single-crystal and nanograined zirconium diboride have been examined using the molecular dynamics method. In the case of single-crystal ZrB2 the anisotropy of the...

Heat cured acrylic resin is the most commonly used denture base materials.  Zirconium dioxide (ZrO2) nanoparticles can be applied as additional filler to increase mechanical strength and to reduce the amount of residual...

The parabens, alkylic esters of p-hydroxybenzoic acid, were synthesized using trifluoromethanesulfonic acid immobilized on zirconium oxide (zirconia) as catalyst. The oxide was obtained by the sol–gel method, using ure...

For the first time, the influence of a B2O3 additive on Magnesium, Zirconium, and Hafnium fluorides, encompassing their structural and optical properties, was subjected to investigation. The phase composition of the MgF2...

Acrylic resin is the most common fabricated material for denture bases. ZrO2 nanoparticles can be used as filler to strengthen the physical properties and inhibit the adhesion of acrylic resins. This study aimed to exami...

A pressing issue in materials science is the controlled application of ceramic composite materials at high temperatures in modern technologies, particularly in nuclear physics, atomic energy, aerospace, and rocket engine...

Zirconium alloys in nuclear power plants operate in high-pressure water at temperatures between 250 and 350 °C. Hydrogen (or deuterium) ingress due to waterside corrosion and if the solubility is exceeded H precipitates...

The dielectric properties of electrochemically grown zirconium oxide films by anodisation of zirconium in 1.0 mol dm?3 phosphoric acid solution were investigated in a 3 to 30 V potential range with a view to inducing su...

The radiation-chemical decomposition of n-hexane in the nano-ZrO2 +n-hexane system under the action of gamma radiation at room temperature is studied by the method of Fourier-IR spectroscopy. The molecular and dissociati...

Abstract Background Various designs of dental implants made of zirconium dioxide (zirconia) as an alternative to titanium implants are available as one-piece implant (OPI) or as bone-level or tissue-level two-piece impla...