Enhanced elastocaloric cooling beyond Clausius–Clapeyron limits

Abstract The elastocaloric effect, driven by stress-induced martensitic transformations, offers a promising route toward efficient and environmentally friendly solid-state cooling. However, its practical implementation has been hindered by an inherent trade-off: materials exhibiting large isothermal entropy changes typically operate over narrow temperature windows, thereby limiting their overall cooling performance. Here, we demonstrate an elastocaloric response in a Ti–Al–Cr superelastic alloy that overcomes this limitation. Direct measurements reveal a pronounced elastocaloric cooling effect over an ultra-wide temperature range of 305 K, from 97 K to 402 K. This temperature span exceeds that predicted by the Clausius–Clapeyron relationship (235 K), indicating a significant deviation from conventional thermodynamic expectations. At room temperature, a large adiabatic temperature change of ~10 K is directly measured, corresponding to a cooling output of 5.76 J·g⁻1 and a material coefficient of performance of 4.6, demonstrating competitive cooling performance at practical operating conditions. In addition, the elastocaloric response is maintained over the entire temperature range despite the expected decrease in entropy change at lower temperatures, indicating that the conventional trade-off between temperature span and cooling strength is effectively mitigated. This exceptional behavior originates from a combination of anomalous temperature dependence of the critical stress for martensitic transformation and high mechanical strength, which together enable fully reversible stress-induced transformations across a broad thermal domain. Our findings reveal a new regime of elastocaloric behavior and establish a guiding principle for overcoming the apparent limitations imposed by Clausius–Clapeyron-based descriptions in caloric materials.