Back to results
Bibliographic record · Consultation and access
Artículo

Separation and preconcentration of inorganic and organomercury species in water samples using a selective reagent and an anion exchange resin and determination by flow injection-cold vapor atomic absorption spectrometry

Altamirano, Jorgelina Cecilia et al · Royal Society of Chemistry · 2002

Supplementary material available
Quick overview. Review the resource’s basic details, then access the content using the main button. This page shows only the information needed to identify, cite, and open the work.

Resource access

Open the content from the main option or choose another available source.

CONICET Digital CONICET Digital OAI-PMH
Entrar por CONICET Digital
Main access

Supplementary material available

El enlace apunta a material asociado, anexos, tablas, datos o página complementaria. No se marca como libro/texto completo.
Open material

Summary

Descripción general del contenido del recurso.

An on-line inorganic (InHg) and organomercury (OrHg) species separation, preconcentration and determination system consisting of cold vapor atomic absorption spectrometry (CV-AAS) coupled to a flow injection (FI) method was studied. The inorganic mercury species was retained on a column (id, 3 mm; length, 80 mm) charged with a Dowex 1X-8 resin (particle size 50-100 mesh) as the anionic complex formed with Methylthymol Blue (MTB), at pH 6.3. Previous oxidation of the organomercurial species permitted the determination of total mercury. Therefore, the separation of mercury species was obtained with the combined use of on-line selective formation of the InHg-MTB complex and the retention of this anionic compound on the anion exchange resin. The difference between total and inorganic mercury determined the organomercury content in the samples. The inorganic mercury was removed on-line from the micro-column with 3 M nitric acid. The mercury cold vapor generation was performed in an on-line system with 7.0% (w/v) SnCl2 and 20% (v/v) HCl as reducing solution. A preconcentration factor of 180 was obtained for the preconcentration of 250 ml of aqueous solution. The detection limit for InHg and OrHg was 0.8 ng l-1. The precision for ten replicate determinations at the 15 ng l-1 Hg level was 4.4% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the separation and preconcentration system for mercury species was linear, with a correlation coefficient of 0.9994 at levels near the detection limit up to at least 100 μg l-1. The accuracy of the method was evaluated by the analysis of a certified reference material QC Metal LL3 Mercury in Water. The method was successfully applied to the speciation of mercury in water samples. Fil: Altamirano, Jorgelina Cecilia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto de Química de San Luis. Universidad Nacional de San Luis. Facultad de Química, Bioquímica y Farmacia. Instituto de Química de San Luis; Argentina Fil: Wuilloud, Rodolfo German. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto de Química de San Luis. Universidad Nacional de San Luis. Facultad de Química, Bioquímica y Farmacia. Instituto de Química de San Luis; Argentina

How to cite

Elegí el formato que necesitás y copiá la referencia al portapapeles.

APA 7

Altamirano, J. C. E. A. (2002). Separation and preconcentration of inorganic and organomercury species in water samples using a selective reagent and an anion exchange resin and determination by flow injection-cold vapor atomic absorption spectrometry. http://hdl.handle.net/11336/101192

MLA

Altamirano, Jorgelina Cecilia et al. "Separation and preconcentration of inorganic and organomercury species in water samples using a selective reagent and an anion exchange resin and determination by flow injection-cold vapor atomic absorption spectrometry." 2002. http://hdl.handle.net/11336/101192.

Chicago

Altamirano, Jorgelina Cecilia et al. 2002. "Separation and preconcentration of inorganic and organomercury species in water samples using a selective reagent and an anion exchange resin and determination by flow injection-cold vapor atomic absorption spectrometry.". http://hdl.handle.net/11336/101192.

Harvard

Altamirano, J. C. E. A. 2002, Separation and preconcentration of inorganic and organomercury species in water samples using a selective reagent and an anion exchange resin and determination by flow injection-cold vapor atomic absorption spectrometry, Royal Society of Chemistry, available at: http://hdl.handle.net/11336/101192 [Accessed 6 Aug. 2026].

Share and print

Save the record, copy its permanent link, or print it as a PDF.

Export reference

You can export the record in common formats for use in a reference manager.

Resource details

Bibliographic information to help confirm that this is the correct material.

Title
Separation and preconcentration of inorganic and organomercury species in water samples using a selective reagent and an anion exchange resin and determination by flow injection-cold vapor atomic absorption spectrometry
Author / contributors
Altamirano, Jorgelina Cecilia et al
Publisher
Royal Society of Chemistry
Publication year
2002
ISSN
0267-9477
ISSN
0267-9477
Language
English

Subjects

Explore related resources through these subjects.

Copied