News Help Institutional access
Back to results
Bibliographic record · Consultation and access
Artículo

Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr

S. Pukas et al · Vasyl Stefanyk Carpathian National University · 2020

Open-access full text
Quick overview. Review the resource’s basic details, then access the content using the main button. This page shows only the information needed to identify, cite, and open the work.
Author / responsible party
S. Pukas et al
Publisher
Vasyl Stefanyk Carpathian National University
Year
2020
ISSN
1729-4428
ISSN
1729-4428
Language
English

Resource access

Open the content from the main option or choose another available source.

DOAJ DOAJ Articles
Entrar por DOAJ
Main access

Open-access full text

Texto completo identificado como acceso abierto.
Open text

Summary

Descripción general del contenido del recurso.

The effect of the WC content and the sintering temperature, as the main technological factor, on the phase composition of TiC–xWC–5VC–18NiCr alloys was investigated by X-ray phase analysis. It was established that the main phases in the investigated alloys were the NaCl-type quaternary (Ti,V,W)C phase and a solid solution of Cr in Ni. Depending on the size of the WC particles used for the preparation, the metal binder could be described by the formula Ni0.75Cr0.25 (for nano WC) or Ni0.5Cr0.5 (for fine-sized WC). In alloys prepared with fine-sized WC, elementary Cr and traces of the Cr3C2 and Cr23C6 were also found. With increasing content of nano-sized WC and sintering temperature the solubility of W in (Ti,V)C increased. No W2C phase was detected under the conditions of the investigation.

How to cite

Elegí el formato que necesitás y copiá la referencia al portapapeles.

APA 7

al, S. P. E. (2020). Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr. https://doi.org/10.15330/pcss.21.3.496-502

MLA

al, S. Pukas et. "Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr." 2020. https://doi.org/10.15330/pcss.21.3.496-502.

Chicago

al, S. Pukas et. 2020. "Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr.". https://doi.org/10.15330/pcss.21.3.496-502.

Harvard

al, S. P. E. 2020, Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr, Vasyl Stefanyk Carpathian National University, available at: https://doi.org/10.15330/pcss.21.3.496-502 [Accessed 10 Aug. 2026].

Share and print

Save the record, copy its permanent link, or print it as a PDF.

Export reference

You can export the record in common formats for use in a reference manager.

RIS BibTeX

Resource details

Bibliographic information to help confirm that this is the correct material.

Title
Influence of the nano-WC content and Sintering Temperature on the Phase Composition of Hard Alloys in the System TiC–WC–VC–NiCr
Author / contributors
S. Pukas et al
Publisher
Vasyl Stefanyk Carpathian National University
Publication year
2020
ISSN
1729-4428
ISSN
1729-4428
Language
English

Subjects

Explore related resources through these subjects.

hard alloy; nano wc; fine-sized wc; x-ray powder diffraction; phase composition
Copied