Automatic Scallion Seedling Feeding Mechanism with an Asymmetrical High-order Transmission Gear Train

Abstract The current automatic scallion-transplanting machine is a complicated mechanism composed of two linkage mechanisms and two band carriers. It delivers seedlings inefficiently because of the movement limitations of the linkage mechanism. This paper proposes a new high-order non-circular gear train for an automatic scallion-seedling feeding mechanism. The proposed gear train has an asymmetrical transmission ratio; i.e., its transmission ratio varies. This allows the mechanism’s execution component to move in a long displacement and rotate in a large rotation angle. The long displacement enables the execution component to reach the designed working position, and the large rotation angle allows it to feed a scallion in the required pose. A mathematical model for calculating the asymmetrical transmission ratio was established according to the closure requirements and the full-cycle motion of the driven gear pitch curve. Then, the parameter-design model of the new seedling-feeding mechanism was established, based on precise pose points and trajectory-shape control points. Moreover, an aided-design program was developed to obtain the parameter-solution domain of the scallion-seedling feeding mechanism. The mechanism parameters, which met the seedling-feeding function, were optimized to determine the transmission ratio, using a program and a kinematic simulation. Finally, a prototype of the mechanism was produced, and a seedling-feeding experiment was carried out. One-thousand seedlings were tested at a rate of 100 seedlings per minute, and the statistical success rate was 93.4%. Thus, the automatic scallion-seedling feeding mechanism significantly improves the efficiency of automatically transplanting scallions.