Development of Reconfigurable Frequency Selective Surface Associating Cross Dipoles and Matryoshka Geometries

Abstract A reconfigurable frequency selective surface, FSS, associating cross dipoles and matryoshka geometries is described in this paper. The proposed reconfigurable FSS uses as active element PIN diodes. With the associated geometries, three resonant frequencies are achieved, two fixed, related to the matryoshka geometry, and one that can be activated or not, related to the cross dipoles geometry. Differently from previous works, an inductor was inserted into the cross dipoles’ horizontal arms, maintaining its resonance for x polarization. The PIN diode inserted into cross dipoles’ vertical arms controls the respective resonance. The design procedures for each geometry, in addition to PIN diode and RF inductor basics are outlined. The expected results are discussed based on the analysis of the resonances of each geometry and the associated geometries, as well as the different PIN diode bias states (OFF and ON). A prototype was fabricated and characterized, obtaining a good agreement between the numerical and experimental results, with a reconfiguration bandwidth of 0.24 GHz, from 2.12 GHz to 2.36 GHz, for a variation of at least 10 dB between the OFF and ON states.