Buscar recursos académicos

Zinc Selenide Nanoparticles (NPs) were fabricated by the aqueous techneque using cold plasma under atmospheric pressure with an exposure time of 3 min and a gas flow rate of 3 liters per minute. films' structural charact...

Ultrafine pure and Mn-doped SnO2 nanoparticles (NPs) were synthesized via the microwave technique. They were produced using tin chloride and hexamethylenetetramine at the molar ratio of 1:20. The concentrations of Mn in ...

To investigate the effects of magnetic stimulation mediated by magnetic/graphene (MNP/G) composite nanomaterials on human scleral fibroblast (HFSF) proliferation and collagen synthesis, exploring its potential for myopia...

Computational study of secondary electron emission (SEE) from ZnO nanorod arrays deposited on Au/Si₃N₄ substrates under irradiation with 16O ions in the 10–100 MeV energy range was performed. Using a combination of...

The paper is an overview of published data within the perspective method of hydrothermal synthesis of nanodispersed titanium dioxide. Organizing data allowed to capture the general trends of the relationships between the...

Scanning probe techniques have evolved significantly in recent years to detect surface morphology of materials down to subnanometer resolution, but without revealing spectroscopic information. In this review, we discuss ...

Abstract Periodontitis and dental caries are the most widespread non-communicable oral disorders worldwide, affecting approximately 3.5 billion people worldwide. Nevertheless, existing in vitro models do not accurately ...

Photodynamic therapy (PDT) has lately been identified as a promising anticancer method and gained tremendous interest due to its controllability, non-invasive nature, and negligible side effects. Nevertheless, the develo...

In this paper we present a rapid and simple onepot method to obtain gold nanoparticles functionalized with folic acid using a photochemistry method. The bioconjugate folic acid-gold nanoparticle was generated in one step...

The advent of optically functional materials with low-intensive processing methods is accompanied by a growing need for high resolution imaging to probe the inherent inhomogeneities in the underlying microstructure. Atom...

Heavy metal contamination poses serious environmental and health risks, even at trace levels, highlighting the need for efficient and sustainable detection strategies. This study presents a green approach for producing n...

Terahertz (THz) waves have been widely hailed as a key enabling technology for future sixth generation (6G) wireless networks. Dynamic modulation of their polarization states is of great attraction for high-capacity comm...

Three-dimensional (3D) imaging at the nanoscale is a key to understanding of nanomaterials and complex systems. While scanning probe microscopy (SPM) has been the workhorse of nanoscale metrology, its slow scanning speed...

Platinum nanoflowers (Pt NFs) composed of an ordered assembly of nanoparticles were synthesized by an ethanol reduction of [PtCl6]2– under a reflux condition (85 °C) at pH 2.5 in the presence of PVP (molecular weight ...

Microring resonators (MRRs) are the important devices for the development of silicon-based optoelectronic integrated chips. Their composition of optical modules, such as optical modulators, switches, and optical logic ga...

This paper presents a study of adsorption and vibrational features of folic acid, using surface-enhanced Raman scattering (SERS). A gold-capped silicon nanopillar (Au NP) with a height of 600 nm and a width of 120 nm was...

Murraya paniculata (MP) can be used as a reducing agent to produce silver nanoparticles (AgNPs) using a simple procedure. AgNPs are characterized in morphological and chemical properties, antioxidant activity, and cytoto...

In the present work, the synergistic effect of multiwalled carbon nanotubes and glycidyl polyhedral oligomeric silsesquioxanes on the compression after impact behaviour of multifunctional carbon fibre–reinforced epoxy ...

Silver colloid based nanostructures are a very common means of achieving strong SERS signals. This is due to the hot spots that are formed in between the nanoparti‐ cles, as well as their ease of synthesis. They are fr...

In this article, we report the measurement of underwater aerophobicity, through the captive-bubble method, for different polymeric coatings employed to protect microscale and nanoscale flexible electronic devices for sea...

Raw TiO2 nanoparticles were prepared using the hydroly‐ sis of TiCl4. The nanoparticles were subjected to a surface treatment in diluted sulphuric acid and, subsequently, calcined at different temperatures. Then, a typ...

Along with the increasing requirement for efficient organic conversions using green chemistry, there is a need to develop highly efficient and eco-friendly catalytic reaction systems. Gold nanoparticles (AuNPs)-based nan...

What makes three dimensional semiconductor quantum nanostructures so attractive is the possibility to tune their electronic properties by careful design of their size and composition. These parameters set the confinement...

The catalytic conversion of palm oil was carried out over four zeolite catalysts—Y, ZSM-5, Y-ZSM-5 hybrid, and Y/ZSM-5 composite—to produce jet biofuel with high amount of alkanes and low amount of aromatic hydrocarb...